UniqueKiosk · Shenzhen workshop

Rectangular Eyewear Display Table with Drawers, 2000 mm

$890.00

A long oak eyewear display table with five glass trays and two drawer banks for frame stock. Price range: USD 400-1,200, set by length and tray count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Long Table, Five Trays

This eyewear display table runs 2000 mm along one side of an optical store. Five glass trays sit in a row on the oak top. Two drawer banks hold frames and tools right below the trays. The open ends give a shopper room to sit and compare frames. An eyewear display table this long keeps two staff working at once. The top stays clear for a mirror and a fitting pad.

Oak Body and Glass

The top is 25 mm oak laminate over a honeycomb core. Pedestals use 18 mm oak laminate with a matching edge band. Trays are 6 mm tempered glass on a slim aluminium frame. Legs are 40 x 40 mm oak sections with a closed frame at each end. Weight is 96 kg and the top carries 80 kg. An eyewear display table built this way resists knocks in a busy fitting room. The laminate also keeps the unit light enough to move.

Drawer Storage

Each pedestal holds five drawers on ball-bearing rails. A drawer takes 15 kg of frames or tools and closes with a soft action. Locks are keyed alike, so one key opens every drawer in the bank. Trays lift straight out for cleaning, and the glass sits in a rebate. Staff reset the eyewear display table in a few minutes at opening. Labels can be added to the drawer faces on request.

Specification Detail
Dimensions 2000 x 1000 x 750 mm
Top 25 mm oak laminate
Trays 5 glass trays, 6 mm tempered
Drawers 2 banks, 5 drawers each, 15 kg
Frame 40 x 40 mm oak legs
Load 80 kg on top
Weight 96 kg

Fitting Room Layout

Set the table 900 mm clear of the wall so a chair fits behind it. Leave 1200 mm on the customer side for a stool and a pram. The low top lets an optician sit and talk at eye level. Place a mirror at the far end, not above the trays. An eyewear display table works best beside countertop displays for ready-made sunglasses. Keep the trays facing the door, not sideways. See store display planning for a full optical floor plan.

Delivery and Setup

The table ships in two crates: top and pedestals apart. Two people build it in about 45 minutes with an M8 hex key. Build the pedestals first, then set the eyewear display table top on them. Feet adjust by 12 mm to level the top on tile. Move it on a pallet truck and never drag a loaded pedestal. Weight is 96 kg, so a two-person lift is the rule. Set the table on a level floor, or the trays will rock. retail displays covers lower display pieces for the same room. store operations teams wipe the glass each morning with a dry cloth.

Cost and Custom Build

Five trays plus two drawer banks cover a full frame range in one footprint. The oak finish hides fingerprints better than gloss white. A two-metre eyewear display table shows five tray rows at one glance. Trays lift out, so a deep clean takes minutes. List price starts at USD 890 for the 2000 mm unit. Ukiosks builds this eyewear display table in any length, tray count and laminate colour. Our team quotes from a drawing. Browse display cases for wall units, or send sizes through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Rectangular Eyewear Display Table with Drawers, 2000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop