UniqueKiosk · Shenzhen workshop

Raw Steel Single Rail Rolling Clothing Rack

$265.00

Raw steel rolling clothing rack with an adjustable single rail and four castors. Price range: USD 265-420, set by rail width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Rail And Frame

A single rail carries the stock on this clothing rack. The rail runs 1220 mm between two square tube uprights. Square tube resists twist better than round tube on a rolling frame. A shop hangs fifteen to twenty pieces on the rail with space between them. The frame breaks down into four parts for transport. The raw steel surface shows a dark oxide tone under clear coat. Display racks include this rolling type.

raw steel rolling clothing rack

Adjustable Height

The rail height moves from 1220 mm to 1680 mm on this clothing rack. Collars clamp the rail at set points and a pin locks each collar. A shop sets the rail high for coats and low for childrens wear. Two staff raise the rail in under a minute. The collars hold the setting under load without slipping. A stock room uses the low setting for folded boxes, and this clothing rack still rolls under a shelf. Retail displays fixtures use the same collar.

clothing rack rail front view

Rolling Base

Four castors sit under the base of this clothing rack. Two castors swivel and two lock, so staff steer the unit with one hand. The base frame runs 500 mm front to back, which keeps the rail steady when full. A shop moves a full rail from the floor to a window without unloading. The castors run on a smooth floor and lift over a 10 mm mat. A back room parks the unit against a wall. Clothing racks list the same base.

clothing rack side profile

Shop Floor Use

The clothing rack suits a boutique run, a stock room or a showroom bay. A raw steel frame reads plain beside pale plaster and timber floors. A shop uses one unit per size range and moves them by colour each week. The open frame keeps the floor visible under the garments. Two units park nose to nose when a rail is empty, and one clothing rack covers a small bay. Countertop displays fit the same bay.

Load And Care

The rail takes 120 kg when weight spreads along the span and the frame stays level. Keep heavy coats near an upright, since every rail bends at mid span. Check the collar pins after a month, because a loose pin drops the rail. Wipe the raw steel with a dry cloth and add clear coat if rust spots appear. Read more about our bench on our steel prep.

clothing rack collar joint

Width Options

Rail width runs from 900 mm to 1800 mm on request. A rail past 1500 mm takes a middle upright for support. The frame also comes with a lower shelf for shoes or boxes. Castors can be swapped for fixed glides on a sloped floor. The finish also comes in matte black or clear lacquer. List price starts at USD 265 for the 1220 mm frame. ukiosks builds this clothing rack in Shenzhen to your sizes, so send your plan through contact us.

Specification Detail
Rail width 1220 mm
Height 1220-1680 mm adjustable
Tube 25 mm square steel
Base 500 mm depth frame
Castors 4, two locking
Load 120 kg
Finish Raw steel with clear coat

Reviews

There are no reviews yet.

Be the first to review “Raw Steel Single Rail Rolling Clothing Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop