UniqueKiosk · Shenzhen workshop

Pillar Boutique Clothing Rack with Twin Posts

$268.00

Twin post clothing rack with brass arms at two heights over two cobblestone stone slabs. Price range: USD 268-380, set by width and post count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Pillars

This clothing rack stands on two brass pillars instead of one frame. Each pillar carries a horizontal arm, and the arms sit at different heights. The upper arm runs at 1680 mm and the lower arm at 1450 mm. Hangers on the lower rail clear the arm above. A ball joint marks each arm height and hides the weld. The twin post layout spreads a full rail over two load points. Display racks use the same twin post idea.

pillar clothing rack twin

Stone Slabs

Each pillar sits on its own cobblestone slab of 400 x 300 mm. Two slabs give the unit a wide stance without a long steel base. The stone runs 40 mm thick and holds the pillar foot with four bolts. A shop sets the slabs apart, so the rail spans the gap. The grey stone matches a concrete floor and a pale wall. Retail displays fixtures share this slab detail.

clothing rack twin posts front

Two Hang Heights

The twin arms let one clothing rack show long coats and short jackets together. A shop hangs coats on the upper rail and tops on the lower rail. The arms run 450 mm long, so the rail clears a wall mirror. Staff reach both rails without a ladder. A bridal studio uses the lower rail for veils and the upper rail for gowns. A clothing rack like this also suits a window bay. Clothing racks list the same rail pair.

clothing rack pillar side

Load And Fit

The rail carries about 45 kg when weight spreads across two posts. Each slab takes half the load, so a soft floor needs no plate. Keep a heavy coat group near a pillar, since the rail bends between them. A loaded clothing rack stays level within 2 mm along the rail. Set both slabs on one level line, so the arms line up. A wide clothing rack still needs a short rail load. Countertop displays fit the same bay.

Clean And Care

Wipe the brass with a dry cloth and polish it twice a year. A brass clothing rack picks up marks at the ball joints, so a soft cloth helps. Brush the cobblestone slabs with mild soap and water. Keep acid cleaners off the stone, since they dull the grain. Read more about our bench and the finish we use. Staff also check the slab bolts after a floor move.

clothing rack ball joint

Width And Finish

Rail width runs from 1000 mm to 1600 mm between the pillars. Post height runs from 1600 mm to 1900 mm. Brass is the standard frame, with matte black or brushed steel as an option. The arms also come in a single height for a straight rail. List price starts at USD 268 for the 1200 mm unit. ukiosks builds this clothing rack in Shenzhen to your rail span, so send your plan through contact us.

Specification Detail
Height 1750 mm
Posts 2 brass, 25 mm
Arms 450 mm at 1450 and 1680 mm
Rail 1200 mm between posts
Base 2 cobblestone slabs 400 x 300 mm
Load 45 kg
Weight 14 kg

Reviews

There are no reviews yet.

Be the first to review “Pillar Boutique Clothing Rack with Twin Posts”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop