UniqueKiosk · Shenzhen workshop

Pharmacy Shelving Unit with Wooden Frame, 1000 mm

$880.00

A cream pharmacy shelving unit with six open shelves on each side and a blank header. Price range: USD 150-800, set by width and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Double Sided Shelving Body

This pharmacy shelving unit holds stock on two sides from one footprint. Six open shelves run on each face, with a plain header panel above them. The body is 1000 mm wide, 450 mm deep and 2100 mm tall. The cream frame keeps a small dispensary bright. A pharmacy shelving unit like this turns one mid floor slot into a full stock run. Staff pick from both aisles without walking around a wall, so a pharmacy shelving unit suits a narrow aisle.

Wood Frame and Panels

The frame is 25 mm blockboard with a cream painted finish. Shelves are 18 mm board with a low gloss coat and a matching edge band. The header is a 300 mm panel with a white face for a printed strip. Feet are adjustable on a threaded stem. Weight is 92 kg. Every pharmacy shelving unit is squared in the workshop before paint. Joints are dowelled and screwed, so the body stays tight.

Dispensary Layout

Place the unit on a mid floor line with 900 mm clear on both sides. Keep the top shelf below 1900 mm so a standing person reaches it. Group by category along a face and by pack size across a shelf. A pharmacy shelving unit keeps the top row for slow lines. The cream tone suits pale walls and white cartons. Two units make a short run, and four fill an aisle. A pharmacy shelving unit also works in a clinic or a care home store. Compare retail shelving runs or wall fixtures panels.

Specification Detail
Dimensions 1000 x 450 x 2100 mm
Frame 25 mm blockboard, cream paint
Shelves 6 per side, 18 mm board
Header 300 mm white panel
Load 25 kg per shelf
Base adjustable feet
Weight 92 kg

Load and Access

Each shelf carries 25 kg on a 1000 mm span, so heavy packs stay near the ends. Keep the bottom shelf for bulk cartons and the upper rows for light boxes. A pharmacy shelving unit with open shelves shows stock without a key. Leave 40 mm at the shelf edge for a label strip. Check the feet each quarter on a tiled floor. One pharmacy shelving unit holds 300 packs per face. store operations teams rotate stock on the lower rows first.

Delivery and Build

The unit ships flat in two cartons: frame parts and shelves. Two people build it in about 40 minutes. Stand the two end panels, fit the cross rails, then set each shelf on its cleats. The header goes on last. Weight is 92 kg, so build it near its final spot. Level the feet before loading stock. store display planning covers aisle plans beside a unit.

Cost and Custom Build

One body serves two aisles, which saves floor space. Six shelves per side hold about 300 packs in a single slot. A blank header takes a printed strip, so a name change is a swap. Cream paint hides scuffs better than white. Open shelves keep stock visible without a key. List price starts at USD 880 for the 1000 mm unit. Ukiosks builds this pharmacy shelving unit in any width, shelf count and finish. Our team quotes from a plan. Browse retail displays for store pieces, or send a drawing through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Pharmacy Shelving Unit with Wooden Frame, 1000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop