UniqueKiosk · Shenzhen workshop

Nettle LED Beauty Display Cabinet, 1000 mm

$1,150.00

A slim LED beauty display cabinet with five lit glass shelves, full-height glass doors and a two-drawer base. Price range: USD 700-1,500, set by lighting and size.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Lit Shelf Layout

This beauty display cabinet stacks five glass shelves behind full-height doors. An LED strip sits under each shelf edge and lights the row below. A backlit lightbox tops the unit for campaign images. The base carries two black glass drawers with soft-close rails. Every shelf stays evenly lit from top to bottom. That matters in a beauty display cabinet, because shade matching needs neutral light.

Frame and Glazing

The frame is 1.2 mm steel with a matte black powder coat. Glass shelves are 6 mm tempered with polished edges. Doors are 5 mm tempered glass on soft-close hinges. Interior back panels are white laminate for clean bounce. Cable runs hide behind the back panel. A beauty display cabinet with a white back panel also spreads light better than a dark one. A beauty display cabinet built this way keeps wires out of sight and dust off the stock.

Lighting Details

LED strips run at 4000 K, the neutral white most brands use for swatches. Output is 900 lumens per metre. A dimmer sits inside the top case, set once at install. Staff rarely touch it after that, which keeps every beauty display cabinet in the chain consistent. Total draw is 60 W for the whole cabinet. Drivers are separate, so a strip can be swapped in minutes. Shelf spacing follows the same rules as retail shelving. A beauty display cabinet with separate drivers avoids a full refit when one strip fails.

Specification Detail
Dimensions 1000 x 400 x 2200 mm
Shelves 5 glass, 6 mm tempered
Doors 2 full height, 5 mm tempered
Frame 1.2 mm steel, matte black powder coat
Lighting 4000 K LED, 900 lm per metre, 60 W
Base 2 black glass drawers
Weight 95 kg

Shops and Rooms

Skincare brands place one unit per product family. Cosmetic chains line three along a wall. Salon reception areas use one for retail stock. Duty-free fixtures pair a lit cabinet with a low counter, often against a wall fixture run. At 1000 mm wide, a beauty display cabinet fits a 1.2 m bay. A run of two covers most small shops. Compare display cases when glass doors are not needed.

Delivery and Setup

The cabinet ships assembled in one crate, on a pallet. Two people move it with a pallet truck. Levelling feet adjust by 15 mm. A single 13 A plug feeds the lights. Weight is 95 kg, so two people handle it on a flat floor. Keep 50 mm at the rear for airflow and the driver box. Store operations staff can wipe the glass and reset shelves in minutes.

Cost and Custom Build

A lit cabinet shows texture and tone better than open shelving. It also locks stock behind glass at night. The five shelves hold a full product line in one face. List price starts at USD 1,150 for the 1000 mm unit. Ukiosks builds this beauty display cabinet in any height, shelf count and light temperature. Our team quotes from a drawing. Check countertop displays for small formats, or send a brief through the contact page.

Reviews

There are no reviews yet.

Be the first to review “Nettle LED Beauty Display Cabinet, 1000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop