UniqueKiosk · Shenzhen workshop

Metal Pegboard Display Stand with Three Shelves 1.9 m

$780.00

Black metal pegboard display stand with three shelves and a blank header, sized for tool and hardware aisles. Price range: USD 600-900, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Stand Layout

A pegboard display stand has to hold heavy hardware without looking crowded. This pegboard display stand uses a 900 mm wide perforated panel and three steel shelves. The panel reaches 1900 mm, so hooks can sit above eye level. Shelves sit at 400 mm depth, which fits boxed tools. A blank header at the top takes your own sign card. Retail store fixtures of this build suit tool shops and hardware aisles.

Panel and Shelves

The pegboard display stand panel is 1.5 mm perforated steel with a standard hole pitch. Hooks, bins and small brackets drop in without a backing board. Each shelf carries 60 kg, enough for a full box of fittings. Shelf edges fold down 20 mm, which stops tools sliding off. The pegboard display stand total load reaches 200 kg. Our retail shelving line uses the same perforated panel.

Frame and Base

The frame is 25 mm square tube with a black powder coat. A steel plinth lifts the stand 100 mm, so the lower panel stays clear of mop water. Side supports lock the panel square during a busy day. Bolts arrive in pre-drilled holes, and one fitter can build the frame in 30 minutes. The pegboard display stand base keeps the centre of gravity low. Buyers can add retail slatwall panels along the same aisle.

Specification Detail
Overall size 900 x 500 x 1900 mm
Panel Perforated steel pegboard, 1.5 mm
Shelves Three steel shelves, 400 mm deep
Frame 25 mm square tube, black powder coat
Base Steel plinth, 100 mm high
Loading 60 kg per shelf, 200 kg total
Packing Flat pack, two cartons

Where It Fits

A pegboard display stand works at the end of a tool aisle or beside a service counter. Two stands back to back make a wider run without a wall. The pegboard display stand also fits a parts counter in an auto workshop. Height clears most shop doorways for delivery. Stock sits between 400 mm and 1700 mm, which suits standing reach. See retail display counters for counter height units.

Ordering Notes

Panel width runs from 600 mm to 1200 mm, and height from 1600 mm to 2100 mm. Buyers can view retail store display options for the same aisle. Shelves can run three or four levels. finish comes in black, grey or white powder coat. A branded header card can be quoted separately. List price starts at USD 780 for the 1.9 m pegboard display stand. Our contact page takes aisle plans, and ukiosks cuts panel and shelf size to the run you need.

Reviews

There are no reviews yet.

Be the first to review “Metal Pegboard Display Stand with Three Shelves 1.9 m”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop