UniqueKiosk · Shenzhen workshop

Marble White Bar Counter with Faceted Front and Lit Plinth, 3000 mm

$2,400.00

Bar counter in white solid surface with faceted relief front panels, a thick top slab, a lit plinth strip and a glass display case. Price range: USD 2,400-3,800, set by length.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Counter Size

This bar counter runs 3000 mm long and 600 mm deep. A bar counter of this size seats five on one run. The top slab sits at 1050 mm, so a guest leans with an elbow clear. A 40 mm slab edge takes a bump without a chip. A display case sets into the end, so a dessert reads under glass. A plinth lifts the body, so a mop passes under. One counter serves one bar line. A food kiosk plan sets the run.

Faceted Front

The front carries a diamond relief pattern cut into solid surface. A bar counter with this face hides a mark between the ridges. Each panel cuts on a three axis head, so a facet reads sharp. A 12 mm panel glues to a ply core, so a face stays flat. A light groove runs above and below, so a facet reads deep. A soft cloth keeps the surface clean.

Top and Case

The top runs 12 mm solid surface on a steel sub frame. A bar counter with this top takes a hot plate with no ring. A glass case sits at one end with two shelves, so a cake shows at eye level. A sliding door runs on a track, so a hand reaches fast. A socket sits under the top, so a blender plugs in. A drain channel runs behind the case. Our fixture crew checks the track.

Specification Detail
Length 3000 mm
Depth 600 mm
Height 1050 mm
Top 12 mm solid
Case Glass, 2 shelves
Plinth Lit strip
Finish White surface

Bar Use

A restaurant uses this bar counter for a drink station. A hotel uses one for a lobby bar. A club uses one for a cocktail run. A cafe uses one for a service point. Retail counters of this build fill a floor. A room of 12 m takes two counters at this length. A retail display shelf joins the bar.

Build Notes

The body builds from a ply carcass on a levelling base. A bar counter of this build keeps a level top after a move. The facets cut on a CNC head, so a ridge stays true. The case frame welds on a jig, so a glass sits flush. Each lot is checked for a flat top and a free door before crating. Read our bench notes for the glass test.

Sizes and Price

Length runs at 2400, 3000 or 3600 mm for this bar counter. Depth runs at 600 mm as standard. The surface comes white, sand or grey. A display case and a light are options. List price starts at USD 2,400 for the 3 m unit. ukiosks builds this bar counter in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Marble White Bar Counter with Faceted Front and Lit Plinth, 3000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop