UniqueKiosk · Shenzhen workshop

Makeup Display Counter with Storage Drawers, 1500 mm

$1,150.00

A makeup display counter with six storage drawers, a white work top and a rear frame for testers. Price range: USD 600-2,500, set by width and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Panels Above the Top

This makeup display counter splits into two zones. The lower half is a drawer bank. The upper half is a rear frame with a shelf and a top rail, so testers stand in plain view. Two black panels tilt on the frame for colour cards. The work top is white and runs the full 1500 mm width. Staff serve a shopper and hand over stock from the same spot. A makeup display counter saves a trip to the stock room.

Paint, Board and Drawers

The body is 18 mm MDF with a pink lacquer at 30 gloss. The work top is 25 mm MDF with a white matte finish and a 2 mm edge. Drawers run on steel ball sliders with soft close. Each drawer takes 15 kg. The rear frame is 18 mm board with a white face and an aluminium top rail. Weight is 92 kg. A makeup display counter this deep needs a helper to move it. Lacquer dries in six coats.

Counter Layout

Place the counter on a wall line or in a corner, 900 mm from the next unit. Keep the work top clear of clutter so a shopper sees the testers first. Panel prints fit the two black boards, and the rail takes a price strip. Six drawers hold testers, stock and tools with a lock on each column. A makeup display counter pairs well with a mirror and a stool. One makeup display counter fills a small brand bay. Compare display counters sizes or countertop displays bench trays.

Specification Detail
Dimensions 1500 x 600 x 1450 mm
Body 18 mm MDF, pink lacquer
Work top 25 mm MDF, white matte
Drawers 6, ball slider, soft close
Rear frame 700 mm above top, aluminium rail
Load 15 kg per drawer
Weight 92 kg

Space Under the Frame

The rear frame sits behind the work top, so the top surface stays free for service. A shopper can lean in and test a shade without blocking the drawer bank. The frame height is 700 mm above the top, which clears an average shelf above. Two panels slide out for a change of campaign. A makeup display counter with this split keeps stock and testers apart. Staff reach drawers without stepping back.

Delivery and Setup

The counter ships in three cartons: cabinet, top and rear frame. Two people build it in about 45 minutes. Set the cabinet level, fit the top, then bolt the frame to the rear cleats. Drawers ship in place and only need the safety clips removed. Weight is 92 kg. Clean the lacquer with a damp cloth and avoid solvent. store operations teams check the sliders twice a year. store display planning covers floor plans beside a service counter.

Cost and Custom Build

Six drawers under one top remove the need for a separate stock unit. The rear frame gives testers a stage at eye height. Two black panels let a brand change colour cards without a new cabinet. Pink lacquer suits a cosmetics floor, and other colours cost the same. A makeup display counter also works as a fragrance bar. List price starts at USD 1,150 for the 1500 mm unit. Ukiosks builds this makeup display counter in any width, drawer count and finish. Our team quotes from a drawing. Browse retail displays for floor pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Makeup Display Counter with Storage Drawers, 1500 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop