UniqueKiosk · Shenzhen workshop

Lumen White Pedestal Jewelry Display Case, 400 mm

$780.00

A white pedestal jewelry display case with a sealed glass cube hood, top light and lock. Price range: USD 500-1,600, set by height and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

One Object, One Stage

A pedestal jewelry display case lifts one piece to eye level. It also keeps that piece apart from the rest of the stock. This unit sets a glass cube on a white plinth. The cube is 500 mm tall, and the plinth adds 900 mm. A pedestal jewelry display case works well for a hero necklace, a signet ring or a watch. The white base keeps the eye on the piece. The unit also suits our jewelry display bays.

Glass and Light

The hood uses 5 mm tempered glass with a thin aluminium edge. An LED bar at the top edge gives a 4,000 K light and draws 8 W. A pedestal jewelry display case needs a cool light, since a warm lamp shifts stone colour. The bar sits behind the top frame, so glare stays out of the glass. A sealed hood also keeps dust off the stones. Stones and gold read true under this light. The hood stays cool to touch, so a stone does not dry.

Access and Security

A cam lock sits on the front glass door, and the key turns a 20 mm latch. Staff open the hood from the front, so the top light stays wired in place. A pedestal jewelry display case with a lockable door cuts the risk of a grab during a busy hour. The plinth has a hollow back for a cable run and a small spare-parts tray. The base sits flush and carries a levelling foot. Frame detail follows our retail display work, and the plinth height matches our display table spec.

Specification Detail
Overall size 1400 H x 400 W x 400 D mm
Plinth White satin laminate, 900 mm tall
Hood Glass cube, 5 mm tempered
Light LED bar at top edge, 4,000 K
Lock Cam lock on the front glass door
Load on hood 6 kg per shelf area
Weight 46 kg per case

Dressing the Cube

Two necklace busts fit the 400 mm cube with a 60 mm gap, or one bust plus a ring tray. A pedestal jewelry display case reads best when the cube holds no more than three pieces. Keep the tallest prop at 250 mm, so the light reaches the top of the piece. A small price card sits on the plinth top, just outside the glass. Keep the card at 60 mm wide, so it does not block the cube. Swap the group each week, so the display stays fresh. A pedestal jewelry display case with three props reads clean.

Where It Stands

The case suits jewelry shops, watch counters, hotel lobbies and auction previews. It also works in a museum shop for a single small object. A pedestal jewelry display case at 1,400 mm stands above a counter. A shopper looks up at the piece from that height. Leave 700 mm in front, so a customer can step close. Set it beside a countertop display for the smaller items.

Price and Build

List price is USD 780 for the 400 mm pedestal jewelry display case with top light and lock. Price moves with plinth height, glass size and light count. The cube keeps a single piece apart from the stock, and the lock protects it during trade. Our Shenzhen factory builds this pedestal jewelry display case to your piece size and plinth height. Hood detail follows our display cases build, Send the piece list through contact us for a quote.

Reviews

There are no reviews yet.

Be the first to review “Lumen White Pedestal Jewelry Display Case, 400 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop