UniqueKiosk · Shenzhen workshop

Linen White Acoustic Meeting Pod with Glass Door, 1100 mm

$9,200.00

A single-person acoustic meeting pod with a glass door, a fold-down desk and a stool inside. Price range: USD 9,000-15,000, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Built for Open Offices

Open office floors are loud, and a meeting pod gives one person a quiet room without building walls. This unit stands 2,200 mm tall and 1,100 mm wide, so it fits beside a desk bank. It rolls on four casters and locks in place with two feet. Teams use the same meeting pod for calls, interviews and focus work on one day. Small firms can add a modular booth build without a building permit.

Shell and Acoustic Build

The shell is a steel frame with laminated acoustic panels. A 50 mm core absorbs speech across the normal voice range. Panels bolt together, so a damaged face can be swapped in minutes. The white laminate finish wipes clean, and the edges take a bump without chipping. A sealed meeting pod cuts nearby speech to a soft hum, which helps in a shared room. The framing follows the same logic as store fixtures that must survive daily use.

Door, Glass and Light

The front carries a single glass door in a narrow white frame. Tempered glass of 8 mm keeps the meeting pod safe when a bag swings into it. A lever handle sits at 1,000 mm, so the door opens with one hand. The door swings outward, which keeps the floor inside clear. An LED ceiling panel gives 400 lux at desk height for screen and paper work. See the glass build on our display cases page.

Specification Detail
Overall size 1100 W x 1100 D x 2200 H mm
Shell Steel frame, 50 mm acoustic panels
Door 8 mm tempered glass, outward swing
Lighting and air LED ceiling panel, 12 V fan
Power 2 sockets and 1 USB port
Base 4 casters, 2 locking
Finish White laminate shell, white frame

Power, Air and Casters

Two sockets sit inside at 1,100 mm, with a USB port beside them. The cable enters through a base grommet, so no lead hangs outside the shell. A 12 V fan moves about 30 cubic metres of air per hour. Four casters carry the meeting pod, and two of them lock with a foot pedal. The unit weighs around 180 kg, and a pallet truck moves it across a flat floor. Our display tables use the same locking caster set.

Where Teams Use It

Offices use the meeting pod for three jobs. Calls need privacy, interviews need a closed room, and focus work needs quiet. A pod beside a desk bank covers all three without a new partition. Shop back offices and clinic reception areas use the same unit for staff calls. Measure the door width on the route before delivery, since the shell does not fold. Counters and cash points sit nearby in many layouts, as on our cash wrap counters page.

Why This Pod Works

A meeting pod saves floor area and build time. It needs no plastering, no ceiling work and no separate power run. The shell arrives assembled, and the casters keep it movable during a refit. List price starts at USD 9,200 for the 1.1 m unit. Our Shenzhen factory builds meeting pod shells to your drawing and finish. Send the room size and the cable plan through contact us, and we set the panel and glass sizes.

Reviews

There are no reviews yet.

Be the first to review “Linen White Acoustic Meeting Pod with Glass Door, 1100 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop