UniqueKiosk · Shenzhen workshop
Linen Child Dress Form On Wooden Stand
$160.00
Child size dress form with a white linen cover and a dark turned wood tripod base, 2 to 6 year torso at 900 mm standing height. Price range: USD 130-220, set by age size and base finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Child Size Range
A child dress form needs a smaller shoulder and a shorter waist. This unit covers ages 2 to 6, with a 300 mm shoulder width. The torso runs 420 mm from neck to hem. Standing height reaches 900 mm on its pole. A kids rail sits low, so the form reads at eye level for a young shopper. A parent sees the fit of a school uniform on a small body. Three sizes cover the full kids range. A larger 8 to 10 year torso is built at order. Our children’s mannequins list the size steps.
Linen Cover
This dress form wears a white linen cover over a foam body. Linen grips a fabric, so a dress does not slide during a pin. A dressmaker can push a pin straight into the foam. The cover pulls off for a wash, and a spare cover ships in the carton. Seams run along the side, so the front face stays smooth. The neck ends in a turned wood finial, which holds a collar in place. A linen cover suits a wedding shop and a school uniform rail. This dress form keeps a soft shoulder line, and our half body mannequin line uses the same foam.
Turned Wood Base
A turned wood pole and a three leg base hold this dress form upright. The pole runs 30 mm thick with brass ferrules at two joints. Each leg curves out from the centre hub and ends in a flat pad. The spread measures 400 mm, which keeps the form steady on carpet. Height adjusts through a collar at the pole joint. A staff member sets the height in one turn. The wood is stained dark walnut and sealed. A spare ferrule set ships with each unit.
Pinning And Fitting
Staff pin a garment on this dress form from the hem up. The foam body takes a pin without a mark, and the linen cover hides the entry. A bodice pulls over the shoulder, then the waist takes two pins. A skirt hangs from the hem line. A dressmaker can mark a seam line on the linen with chalk. The form holds a 2 kg dress without a tilt. A fitting card lists the pin points. This dress form suits a sample room and a small studio.
Kids Window Use
This dress form suits a kids window, a uniform rail and a school shop. A small torso reads better than a full child mannequin in a low window. A linen cover takes a party dress and a school blazer in one week. A wood base matches a vintage shelf and a warm shop fit. Two forms at different heights make a size story. A store can swap the cover when it wears. Our clothing store layout notes cover a kids zone. A mannequin alternative suits a shelf with no floor space.
Price And Custom Build
List price starts at USD 160 for this 2 to 6 year dress form on a wood base. An 8 to 10 year torso with a taller pole lands near USD 195. A child dress form lets a small uniform read as a real outfit. A linen cover takes a pin and hides the entry. A turned wood base matches a warm interior. This dress form pairs with retail clothing racks and retail display fixtures. ukiosks builds this dress form to order in Shenzhen. We can reset age size, cover fabric, wood stain and pole height. Send your plan and we return drawings and a quote.
| Specification | Detail |
|---|---|
| Age range | 2 to 6 years (8-10 at order) |
| Torso length | 420 mm, neck to hem |
| Standing height | 900 mm, adjustable |
| Cover | White linen over foam body |
| Base | Turned wood tripod, 400 mm spread |
| Pole | 30 mm wood with brass ferrules |
| Finish | Dark walnut stain, sealed |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.