UniqueKiosk · Shenzhen workshop
Lattice Frame Clothing Rack with Mid Shelf
$355.00
Tall frame clothing rack with a top shelf, a mid shelf and a plate base. Price range: USD 355-500, set by width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Frame Grid
This clothing rack builds as a box, not a rail. Two uprights carry a top shelf, a mid shelf and a plate base. The frame reads as a set of stacked rectangles. A shop uses the grid as a display mark on a plain wall. The box also keeps the stock dust free from the floor. The open back lets light pass through the frame. Display racks list this frame grid.
Two Shelves
A top shelf and a mid shelf carry the folded stock on this clothing rack. The top plate sits at 1750 mm and the mid plate at 950 mm. Each plate runs 25 mm thick with a folded edge, so the board holds a neat line. A shop sets folded knits on the mid plate and a basket on the top. The gap between the plates leaves 700 mm for a hanging line. Retail displays fixtures share this plate work.
Plate Base
A steel plate closes the bottom of this clothing rack. The plate sits 60 mm off the floor on four short feet, so a mop passes under the frame. A shop sets a pair of shoes on the plate and keeps the mid shelf for knits. The plate also stops a rolling basket from hitting the uprights. Staff slide the unit on the plate for a reset. Clothing racks list this plate base.
Shop Fitting
The clothing rack suits a concept store, a hotel suite or a small boutique. Its box shape fits a corner without a wall strap. A shop places this clothing rack beside a low bench and a mirror for a full view. The open back also lets a shopper see the wall poster behind the stock. Countertop displays fit the same corner.
Load And Care
Each shelf plate holds 35 kg and the base plate 30 kg on this clothing rack. Keep the heavy stock on the mid plate, since the top plate sits on a lighter weld. A loaded frame stays level within 2 mm across the four feet. Check the plate brackets after a month, since a loose bracket lets a shelf dip. Wipe the plates and avoid a wet mop on the steel. Read more about our bench on our box frames.
Size Options
Width runs from 900 mm to 1200 mm on request. Height runs at 1700 mm or 1850 mm. A shop can add a hanging rail between the plates. The plates can also swap for a marble or oak board. The finish also comes in chalk white or oxide grey. List price starts at USD 355 for the 1000 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your sizes through contact us.
| Specification | Detail |
|---|---|
| Width | 1000 mm |
| Height | 1800 mm |
| Frame | 25 mm square steel |
| Shelves | Top and mid, 25 mm plate |
| Base | Plate, 60 mm off floor |
| Load | 35 kg per shelf |
| Finish | Matte black powder coat |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Gold Frame Boutique Shelving Wall, Three Doors 2 m
Price:
Black Glass Display Tower, Three Bays 2.1 m
Price:
Bronze Single Rail Garment Rack, Three Shelves 2 m
Price:








Reviews
There are no reviews yet.