UniqueKiosk · Shenzhen workshop

Laminate Jewelry Furniture Set, Wall Cabinets and Counter

$3,600.00

A six-bay wall run plus a 3.6 m glass counter, built as one set for a jewelry floor. Veneer cabinets, quartz top and LED lit shelves. Price range: USD 3,200-4,200, set by bay count and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

One Wall in One Order

A jewelry store furniture set saves the fitting stage that single units create. Six wall bays arrive matched, so the glass lines and light runs stay level. This jewelry store furniture uses dark wood veneer panels and a white quartz counter top. Each bay holds four glass shelves behind a framed door. Staff see stock from the aisle, and shoppers see it from the entrance. The set reads as one built-in wall, not six cabinets.

Cabinet Build and Lighting

Each cabinet body is 18 mm plywood with a wood veneer face. The door frames are aluminium, powder coated in a bronze tone. Tempered glass shelves sit on steel pins, and each shelf carries 12 kg. A 12 V LED strip runs at the top of every bay, so the light falls on the deck below. Any jewelry store furniture bay can be bought alone. Our display cabinets page shows the same build in single units.

Specification Detail
Wall bays 6 bays, 800 mm each
Wall height 2400 mm
Cabinet body 18 mm plywood, wood veneer
Shelves 4 tempered glass per bay, 12 kg
Counter 3.6 m, 25 mm quartz top
Lighting 12 V LED strip per bay
Finish Walnut, oak or matte black veneer

Counter Length and Seating

The counter runs 3.6 m in three joined sections. The top is 25 mm quartz on a steel sub frame. A glass showcase sits on the rear half, so staff can show pieces under glass. Four stools tuck under the customer side, and each seat clears 600 mm. The whole jewelry store furniture line sits on adjustable feet, so the counter levels with the floor. Pair it with a display counter if you need a second selling point.

Install and Layout Notes

Plan 900 mm between the wall run and the counter, so a chair pulls out. Leave 120 mm behind the wall cabinets for cable and driver access. Join the counter sections on site, then set the glass tops last. Delivery comes in eight cartons, and two people lift each bay. Check our jewelry showcase layouts before you fix the wall line. Lock kits for the glass doors come in the same carton. Every jewelry store furniture door uses the same key blank.

Finish and Size Choices

The jewelry store furniture set ships in walnut, oak or matte black veneer. Each jewelry store furniture order includes spare shelf pins and a driver. Counter tops come in white quartz or grey sintered stone. Bay widths run 600 mm, 800 mm and 1000 mm. Wall height runs 2200 mm or 2400 mm. Buyers can drop a bay to fit a short wall. Send a floor plan through our contact page and we quote the adjusted set.

Why Buyers Choose the Set

Buyers who compare full sets look at three things first. They check shelf load, light colour and the counter joint. This jewelry store furniture set keeps all three predictable. It also cuts the fitting schedule, because one supplier owns the wall and the counter. Our store showcases follow the same frame system, and our case locks and lights fit most doors. List price starts at USD 3,600 for the six-bay set with a 3.6 m counter.

Reviews

There are no reviews yet.

Be the first to review “Laminate Jewelry Furniture Set, Wall Cabinets and Counter”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop