UniqueKiosk · Shenzhen workshop

Ladder Acrylic Riser with Five Narrow Steps

$96.00

Narrow ladder acrylic riser 205 x 210 mm with five pine steps and clear acrylic sides. Price range: USD 96-140, set by step count and width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Narrow Step Column

Five narrow pine steps stack in a steep column on this acrylic riser. The unit measures only 205 mm wide, so it fits a tight shelf end or a small vendor table. Height reaches 200 mm at the top step, with a 40 mm rise between boards. A single column of bottles, cups or boxes reads clearly from the front. Both sides stay clear, so light reaches every step. This acrylic riser suits a narrow counter slot. A tall acrylic riser like this also fits a back bar. Acrylic displays use the same steep pitch.

narrow ladder acrylic riser

Panels And Boards

Two clear acrylic panels carry the whole ladder. Each panel runs 5 mm thick and holds five pine boards of 12 mm. A screw passes through the panel into the board end on both sides. The narrow build keeps the load close to the panels, so the unit stays rigid. A finished acrylic riser weighs about 1.5 kg. The pine face is sanded and lacquered. Retail displays fixtures follow this two panel build.

acrylic riser five steps front

Small Format Counters

The riser works on a coffee bar back counter, a nail bar station or a pop up shop table. Five steps keep five product groups apart with no overlap. A barista stacks cups by size from the bottom step up. A vendor puts price cards on the lowest board and stock above. The narrow footprint leaves room for a card stand beside it. Countertop displays fit the same slot width.

acrylic riser steep profile

Load And Balance

Each board carries about 3 kg when weight sits near the panel ends. A narrow acrylic riser tips if a heavy item hangs over one edge, so center the load. Place the unit on a flat counter, because a slope pulls the ladder sideways. Check the screws after a move across a store floor. The base boards stay level within 2 mm. Display racks hold reserve stock nearby.

Care And Carry

Wipe the pine boards dry and clean the acrylic panels with mild soap and a microfiber cloth. Alcohol dulls the panel edge, so keep it off the clear sheet. Carry the unit from both panels at once. A single hand grip on one panel puts a twist on the screws. A dry acrylic riser keeps its finish on a busy counter. Read more about our bench and the finish we use.

acrylic riser step screw

Width And Step Count

Width runs from 150 mm to 300 mm on request. Step count runs from three to six for a taller column. Pine is the standard board, with oak or walnut as an option. The acrylic riser also takes a tinted panel for a darker counter. List price starts at USD 96 for the five step narrow unit. ukiosks builds this acrylic riser in Shenzhen to your slot width, so send your plan through contact us.

Specification Detail
Shelves 5 pine steps
Footprint 205 x 210 mm
Height 200 mm
Material 5 mm acrylic, 12 mm pine
Step rise 40 mm
Weight 1.5 kg

Reviews

There are no reviews yet.

Be the first to review “Ladder Acrylic Riser with Five Narrow Steps”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop