UniqueKiosk · Shenzhen workshop

Jett Chrome Four Arm Straight Clothes Rail, 1500 mm

$130.00

Clothes rail in chrome steel with four straight arms at adjustable heights and a square base. Price range: USD 130-310, set by arm count and height.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Arms and Base

This clothes rail stands 1500 mm tall on a 400 mm square base. A clothes rail of this reach holds four short runs in one bay. The four arms spread at 90 degrees, so a shopper walks round a full view. Each arm carries 15 hangers, so a rail shows 60 pieces. The arms set at any hole in the upright, so a length always clears. The base plate weighs 8 kg. A retail display plan sets the bay.

Chrome Build

The upright is a 30 mm square tube with a polished chrome plate. A clothes rail in this section takes a full arm of coats without a lean. The arms bolt to a sleeve, so a height sets with one screw. The base welds to the upright on a jig, so a post stands true. Each arm ends in a lip, so a hanger stays put. A dry cloth clears a print from a chrome face.

Floor Set

A clothes rail of this build sets in about ten minutes with one tool. A staff sets the base, then picks four holes for the arms and fixes each sleeve. The arms turn to any angle, so a rail works mid floor or beside a wall. A rail holds four rails of 500 mm, so a bay reads full. The leveller feet keep a rail true on tile. A rail fits a van with the arms off. Our store fixture crew ships this base.

Specification Detail
Height 1500 mm
Base 400 mm
Arms 4
Tube 30 mm
Hangers 15 per arm
Base mass 8 kg
Finish Chrome

Store Use

A boutique uses this clothes rail for a four way feature. A denim shop uses one for a size run. A suit shop uses one for jackets and trousers. A pop up uses one as a full mid floor bay. Clothing racks of this build pair with a torso form. A bay of 1200 mm takes one rail with room to walk. A retail mannequin stands at the rail.

Build Notes

The tube cuts on a saw, then drills on a press for the hole row. A clothes rail of this build keeps a true upright after a move. The arm bends on a brake, so a lip holds a hanger. The chrome plate runs at 0.5 micron, so a rail resists a wipe at a door. Each lot is checked for a firm arm and a level base before packing. Read our bench notes for the arm check.

Sizes and Price

Height runs at 1300, 1500 or 1800 mm for this clothes rail. Arms run at two, three or four. The arm length runs at 400 or 500 mm. The finish comes chrome, black or satin steel. A shelf, a sign bracket and a wheel set are options. List price starts at USD 130 for the four arm rail. ukiosks builds this clothes rail in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Jett Chrome Four Arm Straight Clothes Rail, 1500 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop