UniqueKiosk · Shenzhen workshop

Jessop Mall Jewellery Kiosk Island, 4000 mm

$12,500.00

A four sided mall jewellery kiosk with glass showcase counters, fluted panels and a central desk. Price range: USD 9,000-15,000, set by size and fit out.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Four Sides Sell at Once

A mall aisle runs past both ends of an island, so a kiosk with four counters sells from every direction. This jewellery kiosk uses four glass showcase runs around a central desk. A kiosk laid out this way keeps the sales floor open and the stock inside the ring. The desk faces the main walkway, and the counters wrap the rest. A jewellery kiosk in a mall must also keep one side clear for access. Footprint is 4000 mm by 3200 mm. Counter runs follow our jewellery display module.

Counters and Glass

Each counter is 900 mm high with an 8 mm tempered glass showcase on top. A jewellery kiosk needs low glass, so a standing shopper looks down into the case. Doors are hinged on the inner side, so staff reach stock from inside the ring. Glass corners are polished, and the case tops carry 20 kg. Counter fronts are white fluted laminate with an LED wash at the base. A jewellery kiosk front needs that low wash to hide floor scuffs.

Desk and Power

The central desk is 1200 mm wide with a raised terminal shelf and a drawer bank. A jewellery kiosk of this size needs one power feed for lights, terminal and safe. Total LED draw is 24 W, run from two drivers under the desk. Cable runs sit inside the counter frames, so no trunking shows on the aisle side. The desk top is laminate at 900 mm height. Desk stock matches our cash wrap line. Glass stock matches our display case range.

Specification Detail
Overall size 4000 W x 3200 D x 1400 H mm
Counters Four glass showcase runs, 900 mm high
Panels White fluted laminate with LED wash
Posts Gold stainless steel corner posts
Desk Central cash desk, 1200 mm wide
Glass 8 mm tempered, clear, hinged access
Power LED strip per counter, 24 W total

Install and Clearance

The kiosk ships in counter modules, each under 2 m, so it passes through a mall service door. A jewellery kiosk in a mall needs 1200 mm of clearance on all sides for trolleys and cleaning machines. Assembly is on site in one day with four fitters. Counter modules bolt to a floor rail, and levelling feet take a 20 mm floor gap. Weight is about 620 kg. Counter modules follow our mall retail kiosk build.

Where It Fits

The unit suits shopping centres, airport retail, casino floors and department store atriums. A jewellery kiosk island also works in a hotel lobby. There it pairs with a small gift counter. A second kiosk at the other entrance doubles the catchment. Pair it with a permit plan worked out with the mall. Add a lit pedestal at one corner, and keep a clear path past the desk.

Price and Build Notes

List price is USD 12,500 for the 4000 mm jewellery kiosk island. Price moves with counter length, glass type and light fit out. Four selling faces in one footprint make the island efficient per square metre. Our Shenzhen factory builds this jewellery kiosk to your mall footprint and counter height. Frame stock follows our store fixtures line, and glass matches our display case glazing. Send the mall plan through contact us for a quote.

Reviews

There are no reviews yet.

Be the first to review “Jessop Mall Jewellery Kiosk Island, 4000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop