UniqueKiosk · Shenzhen workshop

Jasper White Shoe Wall Shelving Unit, 2400 mm

$780.00

A shoe wall shelf unit with two white towers, twelve oak shelves and a backlit centre panel. Price range: USD 150-800, set by height and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Towers, One Panel

This shoe display wall puts twelve shelves around a lit centre panel. Two white towers hold the shelves, and the panel fills the middle bay. A shoe display wall of this shape keeps one brand story in the centre and product on both sides. The unit is 2400 mm wide and 2200 mm high, so it fills a standard wall bay. The panel takes printed graphics or a plain lit face. Shelves sit at alternating heights for short and tall styles. Wall layout follows our retail wall fixture guide.

Frame and Shelves

The towers are white powder coated steel, welded into two bays and bolted together. A shoe display wall needs thin shelf edges, so the product reads first. Shelves are oak veneer, 280 mm deep, with a 20 mm edge. Each shelf carries 12 kg, enough for two pairs of boots. Shelf pitch alternates between 300 and 450 mm, so tall boots have room. Bracket slots allow a 100 mm height change on site. Shelf stock matches our retail shelving range.

Lit Centre Panel

The centre panel is 1200 mm wide with a white LED face at 4000 K. A shoe display wall uses a neutral white, so leather colours stay true. The panel draws 60 W and runs from a driver behind the frame. The face is a fabric diffuser, which spreads light evenly with no hot spots. Printed graphics clip onto the diffuser without touching the LEDs. The frame holds the panel 40 mm off the wall for airflow. LED panels match our retail display light set.

Specification Detail
Overall size 2400 W x 300 D x 2200 H mm
Towers White powder coated steel, two bays
Shelves Twelve oak shelves, 280 mm deep
Panel Backlit white panel, 1200 mm wide
Shelf pitch Alternating 300 and 450 mm
Lighting LED panel 60 W, 4000 K
Load 12 kg per shelf

Install and Load

The unit ships as two towers and one panel, so it fits through a standard door. A shoe display wall needs a level wall, since the towers share the panel frame. Fixing is two brackets per tower into the wall studs. Total weight is 140 kg, and the load stays at the base. Levelling shims sit under the feet, and the panel frame takes a 10 mm gap. Assembly takes two people for about two hours. Bracket stock follows our retail wall fixture list.

Where It Sells

The unit suits shoe stores, sneaker shops, department store floors and sports retailers. A shoe display wall also works in a mixed fashion store. A small footwear range fits the twelve shelves. Pair it with a shelf run for the rest of the wall. Add a bench for try-ons, and keep 900 mm clear in front of the unit. That gap fits a seated fitter.

Price and Build Notes

A shoe display wall at this size lists at USD 780 with twelve shelves and lighting. Price moves with width, shelf count and panel size. The lit centre panel gives a brand message without a separate lightbox, which saves wall space. Our Shenzhen factory builds this shoe display wall to your bay width and shelf pitch. Tower stock follows our retail wall fixture line, and shelves match our retail shelving range. Send the wall plan through contact us for a quote.

Reviews

There are no reviews yet.

Be the first to review “Jasper White Shoe Wall Shelving Unit, 2400 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop