UniqueKiosk · Shenzhen workshop

Ironwood Phone Display Wall Unit with Two Screen Bays

$1,680.00

Maple and white phone display wall unit with two screen bays, lit shelf rows and base storage. Price range: USD 1,680-2,600, set by bay count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Twin Bays

This phone display wall runs two bays side by side at 2400 mm wide. Each bay stands 2200 mm tall with a 400 mm depth. A shop fits two counter positions below and keeps the floor clear. A phone display wall of this width suits a 12 sqm shop. The two bays share one white spine, so the run reads as a single wall. A shop can also mount one bay alone and keep the second for later. Store display racks list this width.

Screen Bays

A dark panel sits at the top of each bay on this phone display wall. The panel runs 1050 mm wide and 350 mm tall and takes a 43 inch screen. A shop mounts a promo video or leaves the panel plain. A cover frame hides the screen edge, so the wall looks clean. The panel sits behind a maple cap and takes a bracket at four points. A phone display wall with a screen bay works for a launch display. Display cases share this cap depth.

Lit Shelf Rows

Each bay carries two lit shelf rows and a mat strip below. The light sits under the maple shelf at 4000 K and runs the full width. A shop sets handsets on stands in the row and the light lifts the glass back. A slatwall panel sits behind, so a shop can add hooks later. The shelf carries 10 kg in a row. A phone display wall with a lit row reads bright even under a dark ceiling. Display shelves use this shelf depth.

Base Storage

Two closed cabinets sit at the base of this phone display wall. Each cabinet has two doors and one shelf inside. A shop stores handsets, chargers and bags out of sight. The doors take a lock and a recessed pull. A white kick rail keeps the bottom clean. Carcass panels are 18 mm plywood with a maple face and a white lacquer. Joints are clamped and sanded before the finish. A phone display wall of this build holds 40 kg inside the base.

Shop Use

Phone shops use this unit as the main wall and keep a small counter in front. A repair shop sets parts trays on the mat strip and handsets above. A carrier store uses one bay for plans and the other for handsets. The screen bay also suits a new release poster when no monitor is fitted. Store fixtures pair with this base height. A shop with two staff keeps one bay for stock and the other for display. Read our factory notes for the build detail.

Order and Price

Bay count runs from one to four. Width runs at 1200 mm per bay. Height runs at 2000 mm or 2200 mm. The finish comes in maple and white, or full white. A screen bracket, a cable tray and a glass top are options. A shop can also add a lockable handset drawer under the mat strip. List price starts at USD 1,680 for the two bay unit. ukiosks builds this phone display wall in Shenzhen to order, so send your drawing through contact us.

Specification Detail
Width 2400 mm (two bays)
Height 2200 mm
Depth 400 mm
Screen Panel 1050 x 350 mm each
Shelf Rows 2 lit rows per bay
Finish Maple face, white lacquer
Load 10 kg per row, 40 kg per base

Reviews

There are no reviews yet.

Be the first to review “Ironwood Phone Display Wall Unit with Two Screen Bays”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop