UniqueKiosk · Shenzhen workshop

Husk White Slatwall Panel Pack, 1220 x 2440 mm

$420.00

A melamine-faced slatwall panel with aluminium groove inserts, cut to 1220 x 2440 mm. Price range: USD 150-800 per panel pack, set by thickness and inserts.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

One Panel, Many Hooks

A slatwall panel turns a plain wall into a hanging display. This panel is 1,220 mm wide, 2,440 mm high and 18 mm thick. Grooves run every 75 mm, which gives thirty rows of slots on a full sheet. Each row takes hooks, shelves, bins or sign holders from the same system. A slatwall panel needs no frame, since it fixes straight to battens on a wall.

Board and Face

The core is 18 mm MDF at 720 kg per cubic metre. A melamine face sits on both sides, so a panel shows white from either side. A slatwall panel cuts cleanly with a saw, and an edge strip closes the exposed core. Aluminium inserts line each groove, which stops the slot from rounding off under load. Board grades follow our wall fixtures spec.

Inserts and Load

Groove inserts are 1.2 mm aluminium channel pressed into the cut. A hook in an insert holds 15 kg, and a plain groove holds 8 kg. A slatwall panel with inserts also keeps a hook seated after a hundred lifts. Slots run horizontal on this sheet, and a fitter can order vertical grooves for a tower. Slot detail matches our retail displays range.

Specification Detail
Panel size 1220 W x 2440 H x 18 mm
Core MDF, 720 kg per cubic metre
Face White melamine, both sides
Grooves 75 mm pitch, horizontal
Inserts 1.2 mm aluminium channel
Load 15 kg per hook with inserts
Weight 34 kg per panel

Mounting the Sheet

The panel fixes to 45 mm battens at 400 mm centres, or to a steel rail on a plaster wall. Screws go through the back face into the batten. A 3 mm gap at the base keeps the sheet off a wet floor. A slatwall panel weighs 34 kg, so two fitters lift it. Trims close the top, base and two ends. Fixing detail follows our store fixtures build.

Where It Fits

The panel suits fashion, bags, tools, pet goods and convenience walls. A slatwall panel needs 900 mm of aisle in front for a customer to reach a hook. Keep the top row under 2,100 mm, so stock stays reachable without a step. Power is not needed unless a light shelf goes on. Two panels cover a 2.4 m wall bay next to a clothing rack. Pair the wall with a shelving run for bulk stock.

Why This Panel Works

A slatwall panel gives a shop a wall that changes with the season. Hooks, shelves and bins move in minutes, and the aluminium inserts keep the slots tight. The white melamine face reads clean under shop light and hides fixing marks. List price starts at USD 420 for the 1220 x 2440 mm panel with inserts. Our Shenzhen factory cuts slatwall panel sheets to your wall height and slot pitch. Send the wall drawing and the hook plan through contact us, and we set the groove layout.

Reviews

There are no reviews yet.

Be the first to review “Husk White Slatwall Panel Pack, 1220 x 2440 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop