UniqueKiosk · Shenzhen workshop

Hollow Acrylic Cube Riser with Shelf

$68.00

Clear acrylic cube riser with an open bottom and one internal shelf panel, 200 mm wide and 150 mm tall. Price range: USD 68-120, set by cube size and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Shelf Inside Cube

One shelf panel sits inside this acrylic riser cube. The panel divides the body at mid height, so a small box fits under the shelf. A watch roll sits on top, and a card sits below. The open bottom leaves the lower space free. A buyer sees two pockets in one cube. The shelf adds a second level without a second unit. This acrylic riser works as a compact two tier stand. Our acrylic displays list the same shelf detail.

hollow acrylic cube riser

Open Bottom Body

Five clear panels form this acrylic riser, and the base stays open. Without a floor panel the cube weighs less and costs less. The box rests on its four lower rims, so it sits level on a counter. Light passes under the body and lifts the display. A shelf board shows through the base. A 6 mm wall keeps the cube firm when a customer lifts it. This acrylic riser suits a glass counter where the deck must stay visible.

cube riser front view

Bond And Polish

Workers cut the panels of this acrylic riser on a CNC saw. Each face gets a square edge before bonding. Solvent cement joins the walls, then the shelf goes in on a jig. A flame polish clears the top rim and the shelf lip. The seam stays clear, so the front face reads clean. One unit weighs about 900 g. A soft cloth keeps the surface free of prints. This acrylic riser holds its square form after a season of use. Our countertop displays share the finish route.

cube riser side view

Case And Shelf Fit

A jewellery case uses this acrylic riser for a pendant line. A cosmetics shelf stacks two cubes for a three step tier. A museum room sets a fossil on the shelf and a label below. A bakery lifts a cake stand above the tray base. Each cube holds a small item, so the price tag stays close. A stylist swaps the cube order in a minute. This acrylic riser fits a shelf depth of 250 mm. A retail sign holder takes the same jig.

Colour And Finish

Clear sheet suits a glass counter and a light shelf. A black cube of this acrylic riser cuts glare in a spot lit case. A white body blends into a matte fixture run. A frosted shelf panel hides a price sheet under the top item. We can print a small logo on the rear face. A tinted edge marks a size band. Each box packs with foam corners in one carton. This acrylic riser ships in singles or set packs. Our display racks use the same cube.

internal shelf detail

Price And Custom Build

List price starts at USD 68 for this single acrylic riser cube in clear 6 mm sheet. A set of three with one shelf each lands near USD 190. A shelf inside the cube adds a level in a small space. An open base keeps the deck visible. A square body pairs well with another cube beside it. This acrylic riser pairs with retail displays fixtures and countertop easels. ukiosks builds this acrylic riser to order in Shenzhen. We can reset cube size, shelf height, wall thickness and colour. Send your item height and we return drawings and a quote.

Specification Detail
Overall size 200 x 200 x 150 mm
Material 6 mm cast acrylic, clear
Shelf panel One, at mid height
Bottom Open, no floor panel
Colour Clear, black, white or frost
Weight About 900 g

Reviews

There are no reviews yet.

Be the first to review “Hollow Acrylic Cube Riser with Shelf”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop