UniqueKiosk · Shenzhen workshop
Hickory White Guard Shack with Sliding Doors and Glass Panels, 1500 mm
$6,200.00
Guard shack in white aluminium with a roof cap, clear glass panels, two sliding doors and a level base skirt. Price range: USD 6,200-8,400, set by size.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Booth Size
This guard shack stands 1500 mm wide and 1200 mm deep. A guard shack of this size holds one guard and a desk bay. Glass panels run to 1200 mm, so a sight line covers a gate. A roof cap overhangs 60 mm, so rain clears a door. A skirt base lifts the floor, so a wet apron stays dry. One booth serves one gate check. A site booth plan sets the gate.
Frame Build
The shell builds from aluminium profile with a white powder coat. A guard shack in this build takes a wind gust at an exposed gate. Glass runs 6 mm tempered in a gasket, so a pane holds a knock. Lower panels use 40 mm sandwich board, so a booth stays quiet inside. Sliding doors run on a top track, so a floor rail stays clear. A hook lock sits at each door, so a booth seals at night.
Gate Set
A guard shack of this build sets in about one hour. One crew lifts the shell on fork pockets, then levels the base. A cable entry sits at the rear, so a heater runs without a cut. A desk shelf bolts inside at 750 mm, so a monitor faces the gate. A vent louver sits high, so air moves without a draught. A booth stands free, so a kerb needs no pad. Our fixture crew checks the track.
| Specification | Detail |
|---|---|
| Width | 1500 mm |
| Depth | 1200 mm |
| Frame | Aluminium |
| Glass | 6 mm tempered |
| Doors | 2 sliding |
| Roof | Capped |
| Finish | White coat |
Site Use
A warehouse uses this guard shack for a truck gate. A campus uses one for a visitor check. A car park uses one for a ticket point. A plant uses one for a staff entrance. Outdoor booths of this build fill a yard. A gate of 10 m takes two booths at this width. A shelving rack joins a booth.
Build Notes
The profile cuts on a saw with a stop, then joins on a corner block. A guard shack of this build keeps a square shell after a lift. The glass seals on a bead, so a pane stays dry. The door track sets on a shim, so a slide runs light. Each lot is checked for a level sill and a free door before crating. Read our bench notes for the water test.
Sizes and Price
Width runs at 1200, 1500 or 2000 mm for this guard shack. Depth runs at 1200 or 1500 mm. The coat comes white, grey or green. A heater, a shelf and a light are options. List price starts at USD 6,200 for the 1.5 m unit. ukiosks builds this guard shack in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.