UniqueKiosk · Shenzhen workshop

Heritage Glass Display Cabinet with LED Top, 1000 mm

$1,400.00

A heritage display cabinet with a full glass body, LED top box and walnut base. Price range: USD 700-1,500, set by height and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass Body and LED Top

This heritage display cabinet stands on a walnut base with a glass box above it. Three sides are clear glass, so a piece reads from the front and both ends. A walnut top box carries a recessed LED strip that washes light down the case. Inside, a white platform lifts the piece to eye level. The cabinet is 1000 mm wide, 500 mm deep and 1900 mm tall. A heritage display cabinet keeps dust off a piece and keeps hands out. The look suits a gallery, a museum shop or a hotel lobby. The glass is 8 mm thick.

Frame and Glass Build

The base is 18 mm plywood with a walnut veneer and a matt lacquer. Glass is 8 mm low iron tempered, joined with clear silicone. The top box holds a 12 V LED strip at 4000 K and a driver in a side pocket. The white platform is 18 mm board with a laminate face. Load is 40 kg on the platform. Weight is 132 kg. Every heritage display cabinet is glazed on a jig, so the panel gaps stay even.

Placement and Sightlines

Set the case against a wall with 900 mm clear in front and 400 mm at one end. Keep the platform near 900 mm, so a visitor reads a label without bending. Two cases in a row make a small gallery wall. Keep direct sun off the glass to avoid glare. A heritage display cabinet also suits a watch or jewellery area in a hotel shop. Compare display cases floor cases or wall fixtures wall panels. A heritage display cabinet suits a 1 m wall bay.

Specification Detail
Dimensions 1000 x 500 x 1900 mm
Base 18 mm plywood, walnut veneer
Glass 8 mm low iron tempered
Light 12 V LED strip, 4000 K
Platform 18 mm board, laminate face
Platform load 40 kg
Weight 132 kg

Light and Security

The LED strip runs on a 12 V driver behind the top box. Switch it from a rocker at the side. The glass door on the back panel carries a cam lock, so staff load from the rear. The platform takes 40 kg, which covers most ceramics and small statues. A heritage display cabinet weighs 132 kg, so fix the base to the wall. Clean glass with a non ammonia spray. store operations teams check the lock each week. One heritage display cabinet holds 12 small pieces.

Delivery and Glazing

The case ships in four cartons: base, glass set, top box and platform. Two people install it in about 90 minutes. Set the base, glaze the three panels, fit the top box, then run the LED lead. Weight is 132 kg, so use a pallet truck. Leave 60 mm behind the base for the driver pocket. retail displays covers pieces beside a case.

Cost and Custom Build

Three clear sides make a piece read from any angle. A recessed LED strip lifts colour without a spot light. The walnut top and base frame a display wall. One case holds a single hero piece at eye level. Locked rear access keeps stock safe. List price starts at USD 1,400 for the 1900 mm cabinet. Ukiosks builds this heritage display cabinet in any width, glass height and wood finish. Our team quotes from a floor plan. Browse retail displays for display cases, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Heritage Glass Display Cabinet with LED Top, 1000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop