UniqueKiosk · Shenzhen workshop

Grid Double Shelf Clothing Rack with Hanging Rail

$342.00

Open frame clothing rack with a top shelf, a mid shelf and a full hanging rail below. Price range: USD 342-470, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Top And Mid Shelf

Two steel plates form the top of this clothing rack, one at 1780 mm and one at 1500 mm. The gap between them runs 280 mm, so a folded stack sits under the top plate. A shop sets knit stacks on the mid plate and stock boxes above. Each plate carries a folded edge, so the board holds a straight line. The upper plate also shields the stock from dust. Display racks list this plate pair.

grid shelf clothing rack

Full Rail

A full rail runs under the mid plate of this clothing rack at 1450 mm. The rail spans the whole frame, so a shop hangs thirty pieces in one line. A hanger slides from end to end without a stop. The rail also carries a clip sign at the front. Staff load the rail first and fill the plates after. Retail displays fixtures share this rail socket.

clothing rack rail front

Side Scroll

The side uprights of this clothing rack carry a thin scroll detail. The scroll ties the four posts into one visual frame and adds no weight. A shop uses the scroll line as a soft mark behind the stock. The detail also keeps the open frame of this clothing rack from reading as a plain shelf bay. Clothing racks list this side detail.

clothing rack rail side

Shop Use

The clothing rack suits a denim shop, a hotel suite or a stockroom floor. The tall frame shows a full outfit in one view. A shop sets the unit beside a fitting room and keeps the rail for try-on pieces. The open front of this clothing rack also lets a shopper see the wall panel behind the stock. Countertop displays fit the same floor.

Load And Care

The rail holds 90 kg and each plate 30 kg on this clothing rack. Keep heavy coats near a post, since the rail bends at the middle. A loaded frame stays level within 2 mm across the four feet. Check the rail socket after a month, since a loose socket lets the rail drop. Clear the scroll of dust once a week. Read more about our bench on our socket welds.

clothing rack rail socket

Size Options

Width runs from 1000 mm to 1400 mm on request. Height runs at 1800 mm or 1950 mm. A shop can add a third plate below the rail. The plates can also swap for a marble or oak board. The finish also comes in chalk white or oxide grey. List price starts at USD 342 for the 1100 mm frame. ukiosks builds this clothing rack in Shenzhen to order, so send your bay sizes through contact us.

Specification Detail
Width 1100 mm
Height 1800 mm
Frame 25 mm round steel
Shelves 2 plates, 25 mm
Rail Full span, 1450 mm
Load 90 kg rail, 30 kg plate
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Grid Double Shelf Clothing Rack with Hanging Rail”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop