UniqueKiosk · Shenzhen workshop

Gorse Gold Single Rail Clothing Rack, 1200 mm

$450.00

A brushed gold single rail clothing rack on a white plinth base, with a lower cross rail for a second line. Price range: USD 150-800, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Rail Heights

This single rail clothing rack carries one top rail and one cross rail below it. Long dresses hang from the top rail and land clear of the base. The lower rail holds shirts or folded hanger groups at a shorter drop. A white plinth base anchors the uprights. The frame stays open, so a shopper reads the whole story at once. A single rail clothing rack set this way suits a window or a floor edge. One shopper can reach both rails at once.

Frame and Base

The frame uses 25 x 25 mm steel tube with a 1.5 mm wall. Finish is brushed gold with a clear lacquer top coat. The plinth base is 300 mm deep with a white melamine face and gold trim. Rail load is 60 kg spread across the span. Feet have rubber pads to protect timber floors. A single rail clothing rack with a wide base stays steady when one side is loaded. Rails bolt to the side frames with two M8 screws. A gold single rail clothing rack shows fingerprints, so clean gloves help at install.

Use On The Floor

A boutique places one rack per collection. Denim shops use the lower rail for jeans on hangers. Bridal rooms take the top rail for gowns. The plinth doubles as a shelf for a shoe pair. Keep 900 mm in front for a shopper to pull a hanger. Place two racks 600 mm apart and the floor reads as a run. That spacing also meets aisle rules in most malls. Check store display planning before the floor is marked.

Specification Detail
Dimensions 1200 x 300 x 1500 mm
Frame 25 x 25 mm steel tube, brushed gold
Rails 1 top rail, 1 cross rail, 60 kg load
Base 300 mm plinth, white melamine face
Height 1500 mm to top rail
Weight 26 kg
Packing 2 side frames, 2 rails, 1 plinth

Sizes and Options

Standard spans run from 900 mm to 1500 mm. Height is 1500 mm to the top rail. A single rail clothing rack can carry a second lower rail at 900 mm or 1100 mm. Face options include brushed gold, matte black and satin steel. A single rail clothing rack order can also mix rail colours with the base. Compare clothing racks for round-rail formats, or retail displays for a mixed floor plan.

Setup and Care

The rack ships flat: two side frames, two rails, one plinth. Assembly takes about 20 minutes with one person and a hex key. The plinth fills with ballast on request for windy sites. Weight is 26 kg, so one person fits the rails at the store. Glass-free frames ship in one carton with foam corners. Metal takes a dry cloth, and the plinth wipes with a damp cloth. A single rail clothing rack cleaned this way holds its finish for years. Store operations staff move it between zones in minutes.

Cost and Custom Build

Gold frames lift a plain wall of stock into a display story. Two rail heights solve a mixed-length range in one footprint. The plinth gives a shoe pair a natural home. List price starts at USD 450 for the 1200 mm rack. Ukiosks builds this single rail clothing rack in any span, rail count and metal finish. Our team quotes from a drawing. Check retail shelving for wall bays, or send sizes through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Gorse Gold Single Rail Clothing Rack, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop