UniqueKiosk · Shenzhen workshop

Freestanding Glass Display Tower with Shelves, 1000 mm

$1,250.00

A freestanding glass display tower with five glass shelves, a lit canopy and a lockable base. Price range: USD 700-1,500, set by height and light.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Glass on Four Sides

This glass display tower stands free on the floor with glass on all four sides. Five glass shelves run inside a black steel frame, so stock reads from any aisle. A black canopy on top hides the light holders and the cable. The base is a two door cabinet with silver pulls. Height is 1900 mm on a 1000 mm footprint. A glass display tower like this shows a full range from one spot. The square plan needs a 1100 mm bay.

Frame and Shelf Build

Posts are 30 x 30 mm steel tube with a black powder coat. Glass is 8 mm tempered on the sides and 10 mm on the shelves. Each shelf sits on four pin clips and takes 20 kg. The canopy holds six 3 W LED spots at 3000 K. The base cabinet closes on a cam lock. Weight is 96 kg. Every glass display tower is built with a levelled base, then glazed in the workshop. Doors carry a soft close hinge, and a glass display tower keeps stock dust free.

Placement in a Shop

Set the tower at the end of an aisle or near an entrance, with 900 mm clear on two sides. Keep the second shelf near 1400 mm, so a standing shopper reads a label. Use the top shelf for a single hero piece. The base cabinet holds boxes and bags. Two towers flank a doorway as a pair. A glass display tower also works in a hotel lobby or a showroom. One glass display tower fits a lift lobby. Compare display cases counters or jewelry displays pads.

Specification Detail
Dimensions 1000 x 1000 x 1900 mm
Frame 30 mm steel, black powder coat
Glass 8 mm sides, 10 mm shelves
Shelves 5, 20 kg each
Lighting 6 LED spots, 3 W, 3000 K
Base 2 doors, cam lock
Weight 96 kg

Light and Load

Six spots wash the shelves from above, so a glass object casts a short shadow. Switch the spots by a single rocker at the canopy. Load the shelves from the bottom up and leave 30 mm at the glass edge. Keep heavy pieces on the 10 mm shelves, not in the base. A glass display tower at 1900 mm stays below most sprinkler heads. Wipe the glass with a non ammonia spray and a soft cloth.

Delivery and Setup

The tower ships in three cartons: frame, glass and base. Two people build it in about an hour. Set the base and level it, then fit the posts, then the glass panels and shelves. The LED plug sits inside the canopy. Weight is 96 kg, so move it on a trolley before glazing. store operations teams check the pins and the lock each month. store display planning covers aisle plans beside a tower.

Cost and Custom Build

Glass on four sides sells from both aisles without a second unit. Five shelves hold about 60 small items in one footprint. A lit canopy removes the need for a shop spotlight. The lockable base keeps stock close and hidden. Black steel reads sharp against pale walls. List price starts at USD 1,250 for the 1900 mm tower. Ukiosks builds this glass display tower in any height, shelf count and frame finish. Our team quotes from a drawing. Browse retail displays for floor cases, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Freestanding Glass Display Tower with Shelves, 1000 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop