UniqueKiosk · Shenzhen workshop
Five Step Acrylic Riser with Pine Shelves
$139.00
Five step acrylic riser 405 x 210 mm with pine wood shelves on clear acrylic sides. Price range: USD 139-190, set by shelf count and width.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Five Even Steps
Five pine shelves rise in even steps on this acrylic riser. The lowest board sits on the counter and the top board reaches 200 mm. Each step adds 40 mm, so a row of bottles or cups stays visible behind the row in front. The unit measures 405 mm wide and 210 mm deep. Nothing blocks the view from the top, because both sides are clear. This acrylic riser suits a long counter run. Retail displays fixtures often use the same step pitch.
Pine And Acrylic Build
Each shelf is a 12 mm pine board with a sanded face and a clear lacquer coat. Two clear acrylic panels hold the boards, and each board sits on two screws per side. The panel runs 5 mm thick and keeps the ladder rigid. A finished acrylic riser weighs about 2.2 kg, so one person moves it. The pine stays light in tone and shows the grain. Acrylic displays share this panel build.
Counter And Vendor Use
The riser works on a bakery counter, a bar top, a vendor table or a retail shelf. A shop sets cupcakes on the lower boards and boxes on the top board. A vendor uses the acrylic riser to lift the back row above the front row. Cosmetics staff group five shades by row. The clear sides keep the counter color visible through the unit. Countertop displays use the same footprint logic.
Screw And Load
Each pine board carries about 4 kg when weight spreads across the span. Keep a heavy item near the middle, because the board ends are the mounting points. The screws seat into the acrylic with a light turn and no washer stack. Check both ends after a move. A full acrylic riser stays level within 2 mm. A loaded acrylic riser stays level within 2 mm over the width. It holds that line after a reset. Display racks set the stock behind it.
Care And Assembly
Wipe the pine boards with a dry cloth and the acrylic panels with a microfiber cloth and mild soap. Keep water off the wood edges, because a wet edge lifts the lacquer. The unit ships flat and takes about ten minutes to assemble. Tighten each screw by hand first, then finish with a driver. Read more about our bench and the finish we use.
Shelf Count And Finish
Shelf count runs from three to seven on request. Width runs from 300 mm to 600 mm for a longer run. Pine is the standard board, with oak or walnut as an option. The acrylic riser also takes a black side panel for a darker counter. List price starts at USD 139 for the five step unit. ukiosks builds this acrylic riser in Shenzhen to your shelf count and width, so send your plan through contact us.
| Specification | Detail |
|---|---|
| Shelves | 5 pine boards |
| Footprint | 405 x 210 mm |
| Height | 200 mm |
| Material | 5 mm acrylic, 12 mm pine |
| Step rise | 40 mm |
| Weight | 2.2 kg |
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:
Sleek Cosmetic Display Rack, Black Steel Shelves 1.2 m
Price:








Reviews
There are no reviews yet.