UniqueKiosk · Shenzhen workshop

Dune Gold Double Rail Clothing Rack with Top Panel

$385.00

Gold double rail clothing rack with two hanging rails and a decorative top panel. Price range: USD 385-620, set by width and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Rails

This double rail clothing rack carries two hanging rails at two heights. The upper rail sits at 1450 mm and the lower rail at 950 mm. A shop hangs long coats above and shirts below in one look. A double rail clothing rack of this layout doubles the stock on one footprint. Each rail takes 30 kg, so a full load stays level. The rails sit 400 mm apart, so a hanger on one clears the other. Double rail racks list this rail gap.

Top Panel

A gold top panel caps this double rail clothing rack at 1600 mm. The panel has a pierced grid face and a flat border. A shop sets a small sign or a hat on the panel and the unit reads taller. The panel also ties the frame at the corners, so the tube stays square. A double rail clothing rack with a panel suits a window bay. The panel depth runs 400 mm and matches the base. Retail clothing racks use this top cap. A plain panel version follows the specialty rack line.

Frame Build

The frame uses 25 mm steel tube with a brushed gold finish. Each corner is bent rather than welded, so the curve reads smooth. A base rail closes the footprint and takes a low shelf option. Four feet sit under the base and hold the rack level on stone. A double rail clothing rack of this build carries 60 kg in total. The gold coat is clear sealed and resists a hand mark. Each unit leaves the bench after a rail level check.

Specification Detail
Width 1000 mm
Height 1600 mm
Depth 400 mm
Rails 2, at 950 and 1450 mm
Frame 25 mm steel tube, bent
Finish Brushed gold, clear seal
Load 30 kg per rail

Shop Use

Boutiques use this double rail clothing rack in a window and keep two lines on show. A bridal shop hangs long dresses on the upper rail and veils below. A men’s shop puts suits above and shirts below in one bay. A hotel shop uses the panel for a seasonal card. Store display racks pair with this base width. A shop with a deep floor likes the two rails, since stock sits in half the space. Read our bench notes for the build detail.

Finish Choices

The finish comes in brushed gold, matte black or white. Gold suits a warm interior and a marble floor. Matte black reads sharp against a pale wall. A double rail clothing rack with a white coat fits a clean pop up stand. The finish is applied after the bend and the sand, so no ripple shows. A shop can also order a panel in a plain flat face without the grid.

Sizes and Price

Width runs at 1000 mm, 1200 mm or 1500 mm. Height runs at 1500 mm or 1600 mm. Rail count runs at two or three for this double rail clothing rack. The base depth runs at 400 mm. A low shelf, a panel sign holder and a caster set are options. A shop can also order a version with one rail and one shelf. List price starts at USD 385 for the 1000 mm unit. ukiosks builds this double rail clothing rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Dune Gold Double Rail Clothing Rack with Top Panel”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop