UniqueKiosk · Shenzhen workshop

Clothing Display Table with Trestle Base, 1800 mm

$680.00

A wood clothing display table with a thick trestle base and a wide folded-stock top. Price range: USD 400-1,200, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Wide Folded Stock Top

This clothing display table carries folded stock on one flat plane. The top is 1800 x 800 mm, so three stacks sit side by side with room to spare. Two trestle legs hold it at 750 mm, a height that suits a standing shopper. A central beam ties the legs and keeps the span stiff. The base uses plinth feet for even load spread. A clothing display table this wide reads as a low table in a store aisle. The 800 mm depth leaves walk space.

Wood and Joinery

The top is 30 mm engineered wood with a walnut veneer and a 2 mm edge band. Legs are 60 mm thick with mitred corners. The beam joins the legs on bolted plates, so the table ships flat. Finish is a matte water based lacquer at 15 gloss. Weight is 58 kg. A clothing display table built this way holds 120 kg across the top. Grain runs along the length of the top on every unit. Each clothing display table is sanded by hand before lacquer.

Fit and Placement

Set the table near a wall bay with 900 mm clear on the open side. A clothing display table also ends a run of rails. Fold stock in stacks of six and leave 100 mm between groups. The low top keeps the wall behind visible, so a rail can hang above. Two tables make a folded wall for a small shop. A clothing display table also works for denim, knitwear or shoes. Compare clothing racks rails or retail shelving wall bays.

Specification Detail
Dimensions 1800 x 800 x 750 mm
Top 30 mm engineered wood, walnut veneer
Base trestle legs, bolted beam
Finish matte lacquer, 15 gloss
Load 120 kg across the top
Edge 2 mm band, mitred corners
Weight 58 kg

Stability and Load

The trestle base spreads load over four plinth feet, so the table stays flat on tile or timber. A 12 mm beam keeps the span from sagging under stacked denim. Each leg carries 60 kg at the foot. Levelling shims sit under the plinths. A clothing display table set on uneven floor takes two shims at most. Load the middle third first, then push stock to the ends.

Delivery and Care

The table ships as one top and one base frame in two cartons. Two people assemble it in about 25 minutes with an hex key. Bolt the beam to the legs first, then set the top on the frame. Weight is 58 kg. Dust with a dry cloth and wipe spills at once to protect the veneer. store operations teams check leg bolts each season. store display planning covers floor layouts beside a folded wall.

Cost and Custom Build

A flat top at 750 mm beats a shelf unit for folded stock. Shoppers see the whole stack without bending. The trestle base keeps the floor under the table open for storage boxes. Walnut hides dust better than white laminate. A long table pairs with a rail above for hanging stock. List price starts at USD 680 for the 1800 mm unit. Ukiosks builds this clothing display table in any length, height and veneer. Our team quotes from a drawing. Browse retail displays for floor pieces, or send a plan through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Clothing Display Table with Trestle Base, 1800 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop