UniqueKiosk · Shenzhen workshop

Clay White Hair Styling Station with LED Mirror, 1200 mm

$1,680.00

A hair styling station with a backlit mirror, a steel worktop, drawer blocks and a matching chair. Price range: USD 600-2,500, set by size and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

One Chair, One Mirror

A styling station pairs a worktop with a mirror and a chair. This set is 1,200 mm wide and 400 mm deep. The top stands 800 mm high, and the mirror adds 600 mm above it. The mirror carries a backlit LED frame, so a stylist works without a ceiling spot. A socket sits on the mirror base for clippers and a dryer. A salon with a 1.2 m bay fits one styling station per chair. Four bays fill a small salon floor.

Worktop and Storage

The top is a 1.0 mm stainless sheet over a plywood core. It takes dye, bleach and hot tools without a stain. Surface finish follows our retail displays spec. Three storage blocks stack at the right end, each 300 mm high, with a drawer and a socket strip. A wet towel tray sits under the top on the left. A styling station needs a top that stays cool, since a curling iron rests on it. Steel tops follow our store fixtures metalwork.

Mirror and Light

The mirror is 5 mm silver glass with a polished edge. The LED frame runs at 4,000 K and draws 24 W, which gives a neutral light on hair colour. A dimmer sits at the base, so a stylist sets the level for colour work. The frame is a steel box, and the mirror mounts on a bracket. A styling station with a lit frame also brightens a dark wall bay. Frame builds match our display cases work.

Specification Detail
Overall size 1200 W x 400 D x 800 H mm
Mirror 600 mm tall, 5 mm silver glass
Mirror light LED frame, 4000 K, 24 W, dimmer
Top 1.0 mm stainless over plywood core
Storage 3 blocks, drawer and socket strip
Chair Vinyl seat, chrome disc, 480-620 mm lift
Power Socket at mirror base, 40 mm duct

Chair and Height

The chair has a black vinyl seat, a chrome disc base and a hydraulic lift. The lift covers 480 to 620 mm, which suits a stylist standing or seated. A footrest ring sits at 250 mm and takes the client weight. The chair turns 360 degrees on the disc. A styling station needs the chair top at 30 mm below the worktop. Chair builds follow our display table heights.

Where It Fits

Salons, barber shops and hotel spas use this set. A styling station needs 900 mm behind the chair for the client to sit and stand. Keep the mirror 400 mm from the wall, so a stylist has room for a trolley. Power runs from a wall point to a 40 mm duct under the blocks. A row of four stations needs one 16 A circuit. Pair the run with a salon reception counter at the front.

Why This Station Works

A styling station keeps tools, light and the client in one bay. The steel top takes daily chemical spills, and the lit mirror shows true hair colour. Drawer blocks store clippers out of sight. List price starts at USD 1,680 for the single-seat set with a chair. Our Shenzhen factory builds styling station tops and mirror frames to your bay count. Send the bay width and the mirror size through contact us, and we detail the frame and the duct run.

Reviews

There are no reviews yet.

Be the first to review “Clay White Hair Styling Station with LED Mirror, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop