UniqueKiosk · Shenzhen workshop
Champagne Pedestal Display Case with Glass Hood, 500 mm
$680.00
A pedestal display case with a glass hood, an LED strip and a champagne chevron body. Price range: USD 600-1,500, set by height and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Glass Hood on a Plinth
This pedestal display case puts a clear glass hood on a solid body. The hood closes on all four sides and the top, and a thin frame holds each panel. An LED strip runs inside the top edge and throws light down the piece. The display floor is white and carries two low plinths for small items. Below, the body face is a champagne metal finish with a chevron pattern. The case is 500 mm wide, 500 mm deep and 1200 mm tall. A pedestal display case like this suits a jewellery showroom floor. One case shows one hero piece.
Body and Glass Build
The body is 18 mm board with a metal laminate face and a sealed edge. The hood uses 6 mm tempered glass with a polished edge. The frame is 15 mm aluminium in a brushed champagne tone. The display floor is a white suede faced board. The LED runs on a 12 V driver inside the body. Load is 10 kg on the display floor. Weight is 58 kg. Every pedestal display case is squared before the hood goes on, so the glass gaps stay even.
Showroom Placement
Set the case on a level floor with 800 mm clear on each side. Keep the hood near 1200 mm, so a standing customer looks into it without bending. Put one hero piece inside and keep the floor mostly white. A pedestal display case also works in a hotel lobby or a watch salon. Three cases in a row make a collection story. Compare jewelry displays trays or display cases counter cases. Each pedestal display case holds 10 kg.
| Specification | Detail |
|---|---|
| Dimensions | 500 x 500 x 1200 mm |
| Hood | 6 mm tempered glass, 4 sides plus top |
| Body | 18 mm board, champagne metal face |
| Light | 12 V LED strip in hood edge |
| Display floor | white board with 2 plinths |
| Floor load | 10 kg |
| Weight | 58 kg |
Load and Care
The display floor takes about 10 kg, which covers a bust and two cards. Keep heavy pieces off the glass. A pedestal display case at 58 kg needs two people to move it, so plan the spot first. Clean the glass with a soft cloth and a mild spray. Check the LED driver vent each quarter. Wipe the metal face with a dry cloth only. store operations teams dust the hood at open. A pedestal display case takes two minutes of care.
Delivery and Fit
The case ships in two cartons: body and glass hood. Two people set it in about 30 minutes. Place the body, level the feet, then lift the hood on and check the frame line. Weight is 58 kg. Fit the hood before the display floor is dressed, so dust stays out. Test the LED before the glass goes on. retail displays covers other floor pieces.
Cost and Custom Build
A glass hood on a solid body lifts a small piece to eye level. The LED strip replaces a ceiling spot, so the light travels with the case. A champagne face reads warm under shop lighting. Two low plinths let a case show a pair. One pedestal fits a 500 mm floor spot. List price starts at USD 680 for the 1200 mm case. Ukiosks builds this pedestal display case in any height, hood size and face finish. Our team quotes from a showroom plan. Browse retail displays for display pieces, or send a plan through our contact page.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Polish Display Cabinet, Two Bays with LED Shelf Strips
Price:
Skincare Display Cabinet, Black Frame 2 m with Glass Cases
Price:
Marble-Base Double Rail Garment Rack, Gold 1.2 m
Price:








Reviews
There are no reviews yet.