UniqueKiosk · Shenzhen workshop

Cantilever Top Shelf Clothing Rack

$298.00

Black steel clothing rack with a top shelf, a rail under it and a floating base board. Price range: USD 298-460, set by width.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Top Shelf

A flat steel shelf caps this clothing rack at 1780 mm. The shelf carries boxes, folded knits or a wrapped gift stack. It also hides the rail from above, so a shopper sees a clean top line. The plate spans the full width and sits flush with the uprights. A shop uses the shelf for a season display and keeps the rail free below. Display racks list this shelf top.

top shelf clothing rack

Rail Under Shelf

The hanging rail of this clothing rack mounts 60 mm below the shelf. A short bracket welds to the upright and holds the rail in place. The gap lets a hanger swing without touching the board. A shop hangs shirts at 1700 mm, so the hem clears the base. The rail also takes a small spotlight clip when the shelf carries a focal item. Retail displays fixtures share this bracket.

clothing rack shelf front

Floating Base

A flat base plate carries this clothing rack on the floor. The plate runs the full width and 350 mm deep, so the unit stands without a wall strap. Its low profile hides the foot from a shopper at eye level. A shop sets shoes or folded stock on the plate. Staff slide the unit 300 mm on the plate for a reset. The plate also protects a tile floor from a metal edge. Clothing racks list this base.

clothing rack shelf side

Shop Fitting

The clothing rack suits a boutique bay, a denim bar or a hotel retail corner. Its clean top line fits a plaster wall, since the frame carries no cross bracing. A shop places two units of this clothing rack 200 mm apart for a 2400 mm run. The open middle keeps the wall behind visible. Countertop displays fit the same bay.

Load And Care

The rail holds 75 kg and the shelf 40 kg when weight spreads on each surface. Keep heavy coats near an upright, since the rail bends at mid span. A loaded clothing rack stays level within 2 mm across the base plate. Check the shelf welds after a month, since a soft weld lets the board dip. Wipe the plate with a dry cloth and avoid a wet mop on the steel. Read more about our bench on our plate work.

clothing rack shelf weld

Width Options

Width runs from 900 mm to 1400 mm on request. Height runs at 1700 mm or 1850 mm. The shelf can carry a low lip to hold a display item. The frame also comes with a second rail under the base plate. The finish also comes in oxide grey or warm bronze. List price starts at USD 298 for the 1000 mm unit. ukiosks builds this clothing rack in Shenzhen to your plan, so send your sizes through contact us.

Specification Detail
Width 1000 mm
Height 1780 mm
Tube 25 mm square steel
Shelf Steel plate, 300 mm deep
Base plate 350 mm deep
Load 75 kg rail, 40 kg shelf
Finish Matte black powder coat

Reviews

There are no reviews yet.

Be the first to review “Cantilever Top Shelf Clothing Rack”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop