UniqueKiosk · Shenzhen workshop

Buff White Coffee Kiosk with Curved Front and Glass Case

$12,500.00

An island coffee kiosk with a curved white counter, a glass display case and a back sink counter. Price range: USD 11,000-14,500, set by size and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

One Island, Two Sides

A coffee kiosk works two sides at once. The curved front faces the queue, and the back counter serves the barista. This island measures 2,600 mm wide at the front and 1,400 mm deep at the side. A white laminate face wraps both ends, so no edge shows a joint. The customer side carries the display case, and the staff side carries the sink and the shelf. Mall operators lease the coffee kiosk as a single unit with a 2.6 m frontage. Small retail displays fill the case at opening.

Curved Front and Wood Band

The front panel bends on a 300 mm radius at both ends. A 12 mm plywood core takes the bend, and a white laminate face sits on top. A wood-grain band runs at 200 mm above the floor, with an LED strip under the top edge. The band hides the service hatch and the cable tray. A coffee kiosk with a lit band reads well in a dim concourse. The same panel bend technique appears in our cash wrap counters range.

Glass Display Case

The case sits on the left run of the top, with a curved glass lid. Four steel pans hold pastries, and a glass shelf above holds cups. The lid opens on a hinge and stays up without a prop. Glass is 6 mm tempered, with a sealed polished edge. A coffee kiosk display case keeps food covered while the queue reads the stock. Case builds follow the same rules as our display cases page.

Specification Detail
Overall size 2600 W x 1400 D x 1200 H mm
Front panel 12 mm ply core, white laminate, 300 mm bend
Band Wood-grain laminate, LED strip
Display case 6 mm tempered glass, 4 steel pans
Back counter Stainless sink, steel shelf, 2 sockets
Back panel Wood-look laminate on a steel frame
Plinth Levelling feet, cable duct inside

Back Counter and Sink

The back counter stands 100 mm higher than the front run. A stainless sink sits in the middle, with a tap and a splash back. A steel shelf runs above for cups and lids, and a power point sits under it. A wood-look panel closes the back, which hides the wall behind the coffee kiosk. Two sockets feed a grinder and a blender, and a junction box sits in the base. Our display tables use that same raised worktop detail.

Delivery and Setup

The coffee kiosk ships in four parts: front run, back run, back panel and case. Two fitters join the parts on site with cam locks and a level plinth. A mall site needs a 1,200 mm service door for each part. Power comes from a floor box, and a 40 mm cable duct runs inside the base. Allow 1,500 mm of clear floor behind the kiosk for staff movement. A kiosk of this size fits a 3 by 4 m pitch, as on our mall retail kiosks page.

Why This Kiosk Works

A coffee kiosk of this build keeps the queue and the prep zone apart. The curved front softens a hard mall corner, and the lit band draws the eye at 3 m. Glass covers the food, and the sink sits out of customer view. List price starts at USD 12,500 for the 2.6 m unit. Our Shenzhen factory builds coffee kiosk counters to your frontage and case length. Send the pitch size and the pan count through contact us, and we set the panel and glass sizes.

Reviews

There are no reviews yet.

Be the first to review “Buff White Coffee Kiosk with Curved Front and Glass Case”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop