UniqueKiosk · Shenzhen workshop

Birch Black Steel Merchandise Strip, 12 Clips, 850 mm

$40.00

Merchandise strip in black steel with twelve spring clips and a swivel hook. Price range: USD 40-85, set by clip count and strip length.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Strip and Clips

This merchandise strip runs 850 mm long with twelve clips. A merchandise strip of this pitch adds one product row on a wire shelf. The clips sit at 70 mm apart, so a packet hangs clear of the next. Each clip takes a 30 mm edge and holds 0.4 kg. The spine is 20 mm wide flat steel, so it does not twist. A staff restocks a strip in about two minutes. A retail display row uses this clip.

Hook and Join

A swivel S hook at the top takes a 10 mm wire rail. A merchandise strip with this hook turns on the rail, so a shopper reads both faces. A flat header plate sits below the hook at 60 mm square. A shop clips a price card to the plate. The spine ends in a flat tab, so a second strip links below. A pin at the hook stops a full turn.

Shelf Load

The strip carries twelve packets at 0.4 kg, so the load stays under 5 kg. A merchandise strip of this length suits a shelf at 1200 mm to 2000 mm. The bottom clip stops at 150 mm above the floor, so a packet stays off the ground. A shop hangs four strips on one rail for a promo bay. A card at the top names the offer. Our sign holder fits this plate.

Specification Detail
Length 850 mm
Clips Twelve
Clip Pitch 70 mm
Spine 20 mm steel
Hook Swivel S
Load 5 kg total
Weight 1.1 kg

Shop Use

A supermarket sets this merchandise strip on a wire shelf rail. A convenience store uses one at a till point. A pharmacy uses one for a seasonal line. A petrol station uses one at a counter edge. Shelving of this build takes this hook. A rail at 1500 mm gives a 850 mm strip a clear drop. A store fixture plan starts here.

Build Notes

The spine is cut on a shear, so each strip matches in length. A merchandise strip of this build keeps a straight spine after a move. The clip is a spring part riveted to the spine. The hook is a bent rod with a swivel collar. Each unit is checked for a free turn and a firm clip before packing. Read our bench notes for the rivet detail.

Sizes and Price

Length runs at 600, 850 or 1200 mm for this merchandise strip. Clip count runs at six, twelve or eighteen. The finish comes in black, white or chrome. The hook comes as a swivel S or a fixed J. A price plate, a second strip and a carry box are options. List price starts at USD 40 for the 850 mm unit. ukiosks builds this merchandise strip in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Birch Black Steel Merchandise Strip, 12 Clips, 850 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop