UniqueKiosk · Shenzhen workshop

Balsam Black Glass Jewelry Wall Cabinet, 2400 mm

$1,350.00

A glossy black jewelry wall cabinet with two lit glass compartments and three lockable storage cabinets. Price range: USD 700-1,500, set by width and lighting.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Two Lit Compartments

This jewelry wall cabinet splits its upper half into two glass compartments. Each holds three glass shelves on slim steel pins. Spotlights sit under the top cornice and wash the shelves below. Doors are full height tempered glass with locks. A black mullion runs down the middle. Stock reads as one continuous face, yet each case opens on its own. That split suits a jewelry wall cabinet shared by two product lines. Each case also locks on its own.

Body and Finish

The body is 18 mm MDF with a high-gloss black lacquer finish. Glass is 5 mm tempered with polished edges. Shelves are 6 mm tempered and carry 15 kg each. The lower section holds three cabinets with adjustable shelves. Cam locks are chrome with a keyed-alike option. Cornice height is 120 mm. A jewelry wall cabinet with a shallow 400 mm depth keeps aisles wide in small shops. Glass shelves slide out for a full wipe.

Lighting Scheme

Top spotlights run at 3000 K, which suits gold and warm stones. Output is 700 lumens per head for six heads. The draw is 30 W on one driver. Each head tilts 30 degrees, so light lands on stock not on the glass. A separate switch feeds the cornice. Drivers sit in the top box with a service hatch. A jewelry wall cabinet needs that access point. Cables never show on the shop face. Fixings follow the same rules as wall fixtures runs.

Specification Detail
Dimensions 2400 x 400 x 2200 mm
Body 18 mm MDF, high-gloss black lacquer
Glass 5 mm tempered doors, 6 mm shelves
Shelves 3 per compartment, 15 kg each
Lighting 3000 K spotlights, 6 heads, 30 W
Storage 3 lower cabinets with cam locks
Weight 165 kg

Where It Goes

Boutique jewelry shops put one unit on the back wall. Watch dealers use the lower cabinets for boxes. Pawn shops take two units for a long run. A museum room uses the same shape for small objects. Keep 800 mm clear in front for a counter. A jewelry wall cabinet also anchors a repair bench area at the rear. Compare display cases for island formats, or jewelry displays for countertop trays.

Delivery and Care

The cabinet ships in two halves with the cornice packed apart. Two people join the halves on site in about 60 minutes. Levelling feet adjust by 12 mm. Weight is 165 kg. Glass lifts out after the door hinge pins are pulled. A second jewelry wall cabinet joins the same fixing line later. High-gloss lacquer takes a soft cloth only. A jewelry wall cabinet cleaned this way keeps its shine for years. Store operations teams handle the routine in minutes.

Cost and Custom Build

One wall run covers display, storage and security in a single footprint. Locks sit on every door, so stock is safe after hours. The lit cornice replaces extra track lights. List price starts at USD 1,350 for the 2400 mm unit. Ukiosks builds this jewelry wall cabinet in any width, glass count and finish colour. Our team quotes from a drawing. Browse retail shelving, or send a layout through our contact page.

Reviews

There are no reviews yet.

Be the first to review “Balsam Black Glass Jewelry Wall Cabinet, 2400 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop