UniqueKiosk · Shenzhen workshop

A-Frame Sidewalk LED Sign Board Double Sided

$420.00

Double sided A-frame light box for pavement and entry use, 600 x 900 mm faces on a black steel frame, 1100 mm tall. Price range: USD 380-560, set by face size and frame finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

A Frame Stance

An A frame stands on a pavement with no wall behind it. This light box holds two panels at a splay angle and folds flat for storage. Each face is 600 x 900 mm and the unit stands 1100 mm tall. Legs are 25 mm steel tube with a black powder coat. The angle spreads 200 mm at the feet, so the board stays up in wind. Two small feet take a sandbag if needed. The unit weighs about 9 kg and folds in one move. retail display fixtures teams carry two per van.

A-frame sidewalk light box

Two Lit Faces

Two faces let this light box sell in both directions of a walkway. Each panel has its own strip and diffuser behind 3 mm acrylic. Light reads about 800 lux at the centre with a 3000 K tone. A printed sheet slips behind the acrylic from the top slot. A cable runs down one leg to a socket or a battery pack. A battery option runs 6 hours for a market stall with no power point. Each face lights on its own switch. Every light box we ship is tested for both faces.

sidewalk sign front view

Hinge And Legs

A top hinge ties the two halves of this light box together. The hinge bar is steel with a pin, so the frame opens and closes without a tool. A stop plate holds the splay at 15 degrees, which keeps the board steady. Legs are cut square at the foot, so the unit does not wobble on paving. A cross bar joins the legs at mid height. The whole frame folds to 80 mm for a van or a store room. cash counter teams fold it at closing. This light box ships with clear fitting notes.

A-frame side view

Build And Weather

Steel for this light box is cut, welded and powder coated in one batch. Seams are ground smooth before the coat, so no weld line shows. Panels are sealed with a gasket at the top slot, so rain does not enter. Acrylic is 3 mm with a polished edge. A drain hole sits at the lower rail of each panel. The driver is potted and sits inside the frame, not on the floor. Packing is one carton with foam blocks, and display cases crews get a gasket spare. countertop cases panels use the same gasket.

top hinge detail

Where It Stands

This light box suits a shop entry, a market pitch and a forecourt. A 600 x 900 face carries a full price board or a daily offer. A lit board reads from 8 m at dusk, well past a printed sandwich board. A fold flat frame fits a small store room. A battery pack covers a pitch with no power point. Two boards mark both ends of a queue lane. Many shop fit outs stand one by the door. food and drink shops stalls use a battery pair.

Price And Custom Build

List price starts at USD 420 for this A frame unit. A battery pack and a carry bag land near USD 520. A lit A board pulls a passer by from across a street at dusk. A fold flat frame stores in a small room. Two faces cover both walking directions. ukiosks builds this light box to order in Shenzhen. We can reset face size, frame colour, battery capacity and splay angle. Send your plan and we return drawings and a quote.

Specification Detail
Face size 600 x 900 mm each, two faces
Standing height 1100 mm
Frame 25 mm black steel tube, powder coated
Hinge Top bar with pin, 15 degree stop
Light Per face LED, about 800 lux at 3000 K
Power Mains lead or 6 hour battery pack
Weight About 9 kg, folds to 80 mm

Reviews

There are no reviews yet.

Be the first to review “A-Frame Sidewalk LED Sign Board Double Sided”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop