Avada Car Dealer News

Five numbers make a showcase high end

A high-end showcase earns on 5 numbers: a 6 mm a low-iron glass, a 1 mm a bevel, a 0.8 mm a reveal, a 12 mm a shadow gap and a 1200 mm a module. A case that misses 2 reads thin and cheap. That number belongs on a detail sheet, because a glass grade agreed verbally rarely survives a first glazing.

A 6 mm low-iron glass with a 1 mm bevel, a 0.8 mm reveal, a 12 mm shadow gap and a 1200 mm module, so a number reads as quality mall kiosk layout. Most of these greens appear in 4 mm float, which is exactly where 6 shows. Mark it on the sheet too, so whoever glazes the next case has the reference.

Use 6 mm low-iron glass

A 6 mm low-iron glass stays clear and a 4 mm float greens a white, and a case glazes 4 m2. A shop fits 10 cases. One edge checked at arm length settles the question faster than a month of email. None of that shows in an adjective, which is why we print the numbers on a sheet. Designers who read a sheet pay nothing extra, and designers who skip it pay a re-glaze.

A 6 mm low-iron glass costs 120 a case and a 4 mm float 55, and 65 buys a grade. A 4 mm float greens a white at 1 in 3 cases and a green costs 90 of a re-glaze, which is retail displays The same rule holds for a Shenzhen shop and a Dubai one, with the iron content mattering in both.

gold frame case

Bevel 1 mm and reveal 0.8 mm

A 1 mm bevel catches a light and a sharp edge reads industrial, and a case runs 8 edges. A bench bevels 40 edges a day. We keep the number on the same sheet, so a buyer compares an edge spec instead of an adjective. That number belongs on a detail sheet, because a glass grade agreed verbally rarely survives a first glazing.

A 1 mm bevel costs 12 an edge and a sharp 0, and 12 buys an edge. A sharp edge chips at 1 in 5 edges and a chip costs 60 of a re-cut, which is fixture materials Most of these greens appear in 4 mm float, which is exactly where 6 shows. Mark it on the sheet too, so whoever glazes the next case has the reference.

black pedestal cases

Four numbers on a detail sheet

The sheet is what a designer and a glazier both sign, and each line answers a millimetre or a grade shop fixtures. One edge checked at arm length settles the question faster than a month of email. None of that shows in an adjective, which is why we print the numbers on a sheet. Designers who read a sheet pay nothing extra, and designers who skip it pay a re-glaze.

Number Value
Glass 6 mm low-iron
Bevel 1 mm
Reveal 0.8 mm
Shadow gap 12 mm
Module 1200 mm

Set a 12 mm shadow gap and a 1200 mm module

A 12 mm shadow gap floats a base and a 0 gap sits it heavy, and a run holds 6 modules. A store fits 3 runs. The same rule holds for a Shenzhen shop and a Dubai one, with the iron content mattering in both. We keep the number on the same sheet, so a buyer compares an edge spec instead of an adjective.

A 12 mm gap costs 30 a run and a 0 gap 0, and 30 buys a gap. A 0 gap reads heavy at 1 in 4 runs and a heavy read costs 45 of a re-fit, which is counters and towers That number belongs on a detail sheet, because a glass grade agreed verbally rarely survives a first glazing. Most of these greens appear in 4 mm float, which is exactly where 6 shows.

gold drawer case

Check 1 case at 1 metre

A check reads a glass tint and an edge in 10 minutes, and a shop shows 10 cases. A month checks 4 shops. Mark it on the sheet too, so whoever glazes the next case has the reference. One edge checked at arm length settles the question faster than a month of email. None of that shows in an adjective, which is why we print the numbers on a sheet.

A check costs 0 and a skip 0, and 0 buys 10 minutes. A skipped check keeps a 4 mm float at 1 in 3 shops and a green costs 900 a shop, which is glass showcases Designers who read a sheet pay nothing extra, and designers who skip it pay a re-glaze. The same rule holds for a Shenzhen shop and a Dubai one, with the iron content mattering in both.

case row

Conclusion

Six, 1, 0.8, 12 and 1200. Five numbers read as high end. We keep the number on the same sheet, so a buyer compares an edge spec instead of an adjective. That number belongs on a detail sheet, because a glass grade agreed verbally rarely survives a first glazing. Most of these greens appear in 4 mm float, which is exactly where 6 shows. Mark it on the sheet too, so whoever glazes the next case has the reference.

Ask for a glass grade and an edge spec. A 120 glass and a 12 bevel protect 900 a shop and 240 a day. One edge checked at arm length settles the question faster than a month of email. None of that shows in an adjective, which is why we print the numbers on a sheet. Designers who read a sheet pay nothing extra, and designers who skip it pay a re-glaze.

jewellery display cases

Read a glass grade before a luxury adjective. A 6 mm low-iron pane and a 0.8 mm reveal read as quality, kiosk design. The same rule holds for a Shenzhen shop and a Dubai one, with the iron content mattering in both. We keep the number on the same sheet, so a buyer compares an edge spec instead of an adjective. That number belongs on a detail sheet, because a glass grade agreed verbally rarely survives a first glazing.