Avada Car Dealer News

Five numbers finish a surface

A surface treatment holds on 5 numbers: 240 grit, 3 coats, a 40 um film, 25 C and 48 hours of cure. A finish that misses 2 opens a grain and shows a brush line. Mark it on the sheet too, so whoever sprays the next batch has the reference. One panel rubbed by hand settles the question faster than a month of email.

A 240 grit scratch under 3 coats to a 40 um film cured at 25 C for 48 hours, so a number keeps a face flat instead of mall kiosk layout. None of that shows in a colour name, which is why we print the numbers on a sheet. Sprayers who read a sheet pay nothing extra, and sprayers who skip it pay a re-coat.

Sand to 240 grit first

A 240 grit scratch holds a coat and an 80 grit telegraphs it, and a panel takes 2 passes. A kiosk sands 24 panels. The same rule holds for a Shenzhen spray room and a Dubai one, with humidity mattering in both. We keep the number on the same sheet, so a client compares a film thickness instead of a colour name.

A 240 grit pass costs 4 a panel and an 80 grit 2, and 2 buys a pass. An 80 grit scratch telegraphs at 1 in 4 panels and a telegraph costs 35 of a re-sand, which is retail displays That number belongs on a finish sheet, because a grit agreed verbally rarely survives a first delivery. Most of these telegraphs appear under an 80 grit scratch, which is exactly where 240 shows.

primer brush

Build 3 coats to 40 um

A 40 um film hides a grain and a 20 um shows it, and a face takes 3 coats. A kiosk coats 24 panels. Mark it on the sheet too, so whoever sprays the next batch has the reference. One panel rubbed by hand settles the question faster than a month of email. None of that shows in a colour name, which is why we print the numbers on a sheet.

A 40 um film costs 18 a panel and a 20 um 9, and 9 buys a coat. A 20 um film shows a grain at 1 in 4 panels and a show costs 40 of a re-coat, which is fixture materials Sprayers who read a sheet pay nothing extra, and sprayers who skip it pay a re-coat. The same rule holds for a Shenzhen spray room and a Dubai one, with humidity mattering in both.

sanding block

Four numbers on a finish sheet

The sheet is what a sprayer and a client both sign, and each line answers a grit, a coat or a micron shop fixtures. We keep the number on the same sheet, so a client compares a film thickness instead of a colour name. That number belongs on a finish sheet, because a grit agreed verbally rarely survives a first delivery.

Number Value
Grit 240
Coats 3
Film 40 um
Room 25 C
Cure 48 hours

Cure at 25 C for 48 hours

A 48 hour cure hardens a film and a 12 hour cure blocks it, and a room holds 25 C. A kiosk cures 24 panels. Most of these telegraphs appear under an 80 grit scratch, which is exactly where 240 shows. Mark it on the sheet too, so whoever sprays the next batch has the reference. One panel rubbed by hand settles the question faster than a month of email.

A 48 hour cure costs 0 in rent and a 12 hour 60 of floor, and 60 buys a day. A 12 hour cure blocks a film at 1 in 4 batches and a block costs 45 of a re-polish, which is glass showcases None of that shows in a colour name, which is why we print the numbers on a sheet. Sprayers who read a sheet pay nothing extra, and sprayers who skip it pay a re-coat.

Seal an edge before a coat

A sealed edge keeps water out and an open edge swells it, and a panel runs 6 m of edge. A kiosk seals 24 panels. The same rule holds for a Shenzhen spray room and a Dubai one, with humidity mattering in both. We keep the number on the same sheet, so a client compares a film thickness instead of a colour name.

A sealed edge costs 3 a metre and an open edge 0, and 3 buys a seal. An open edge swells at 1 in 4 panels and a swell costs 20 of a re-make, which is counters and towers That number belongs on a finish sheet, because a grit agreed verbally rarely survives a first delivery. Most of these telegraphs appear under an 80 grit scratch, which is exactly where 240 shows.

primed panel

Check 1 panel by hand

A check rubs a film and reads a gloss in 10 minutes, and a kiosk checks 24 panels. A month ships 3 kiosks. Mark it on the sheet too, so whoever sprays the next batch has the reference. One panel rubbed by hand settles the question faster than a month of email. None of that shows in a colour name, which is why we print the numbers on a sheet.

A check costs 0 and a skip 0, and 0 buys 10 minutes. A skipped check keeps a 20 um film at 1 in 4 kiosks and a show costs 160 a kiosk, which is 160 a kiosk. Sprayers who read a sheet pay nothing extra, and sprayers who skip it pay a re-coat. The same rule holds for a Shenzhen spray room and a Dubai one, with humidity mattering in both.

sanding board

Conclusion

Two-forty, 3, 40, 25 and 48. Five numbers keep a finish flat. We keep the number on the same sheet, so a client compares a film thickness instead of a colour name. That number belongs on a finish sheet, because a grit agreed verbally rarely survives a first delivery. Most of these telegraphs appear under an 80 grit scratch, which is exactly where 240 shows. Mark it on the sheet too, so whoever sprays the next batch has the reference.

Ask for a grit and a film thickness. An 18 film and a 4 pass protect 160 a kiosk and 140 a kiosk. One panel rubbed by hand settles the question faster than a month of email. None of that shows in a colour name, which is why we print the numbers on a sheet. Sprayers who read a sheet pay nothing extra, and sprayers who skip it pay a re-coat.

kiosk design

Read a grit before a colour name. A 240 scratch under a 40 um film holds up, display cases. The same rule holds for a Shenzhen spray room and a Dubai one, with humidity mattering in both. We keep the number on the same sheet, so a client compares a film thickness instead of a colour name. That number belongs on a finish sheet, because a grit agreed verbally rarely survives a first delivery.