
Five numbers that keep a case true
A glass display cabinet design turns on 5 numbers: a 4 mm a glass, a 20 mm a frame, a 2 mm a gap, an 8 mm a shelf span and a 1200 mm a case. A cabinet that misses 2 rattles on a tile floor and reads as a toy. None of that shows in a showroom photo, which is why we print the numbers on a sheet.
A 4 mm glass sits in a 20 mm frame with a 2 mm gap and an 8 mm shelf, spans 1200 mm and shuts square, so a cabinet reads as a fixture jewellery cases. Buyers who read a sheet pay nothing extra, and buyers who skip it pay a re-glaze. The same rule holds for a Shenzhen cut shop and a Dubai one, with the frame line mattering in both.
Square a 20 mm frame and 2 mm gap
A 20 mm frame hides a glass edge and a 12 mm shows a chip, and a gap runs 2 mm. A door swings 90 degrees. We keep the number on the same sheet, so a glass shop compares a span instead of a photo. That number belongs on a cabinet sheet, because a glass size agreed verbally rarely survives a cut.
A 20 mm frame costs 180 a case and a 12 mm 120, and 60 buys 8 mm. A 12 mm frame chips at 1 in 5 cases and a chip costs 40 of a re-glaze plus 30 of a frame touch, which is display cases Most of these sags appear on a 4 mm shelf, which is exactly where a 6 mm shelf shows. Mark it on the sheet too, so whoever cuts the next glass has the reference.

Span 1200 mm on a 4 mm glass
A 4 mm glass spans 600 mm and a 6 mm 900, and a case runs 1200 mm. A shelf carries 6 items. One door swung with a finger settles the question faster than a month of email. None of that shows in a showroom photo, which is why we print the numbers on a sheet. Buyers who read a sheet pay nothing extra, and buyers who skip it pay a re-glaze.
A 4 mm shelf costs 32 and a 6 mm 48, and 16 buys 2 mm. A 4 mm shelf over-spans at 1 in 3 cabinets and a sag costs 60 of a glass plus 20 of a fit, which is 80 a cabinet or counters and towers The same rule holds for a Shenzhen cut shop and a Dubai one, with the frame line mattering in both.

Four numbers on a cabinet sheet
The sheet is what a glass shop cuts to, and each line answers a millimetre, a span or a swing shop fixtures. We keep the number on the same sheet, so a glass shop compares a span instead of a photo. That number belongs on a cabinet sheet, because a glass size agreed verbally rarely survives a cut. Most of these sags appear on a 4 mm shelf, which is exactly where a 6 mm shelf shows.
| Number | Value |
|---|---|
| Glass | 4 mm |
| Frame | 20 mm |
| Gap | 2 mm |
| Shelf span | 600 mm |
| Case | 1200 mm |
Hold an 8 mm shelf and a 6 kg load
An 8 mm shelf holds 6 kg and a 6 mm sags at 9 kg, and a load test runs 1 shelf. A cabinet carries 3 shelves. Mark it on the sheet too, so whoever cuts the next glass has the reference. One door swung with a finger settles the question faster than a month of email. None of that shows in a showroom photo, which is why we print the numbers on a sheet.
An 8 mm shelf costs 56 and a 6 mm 48, and 8 buys 2 mm. A 6 mm shelf over-loads at 1 in 4 cabinets and an overload costs 80 of a glass plus 40 of a re-fit, which is 120 a cabinet fixture materials. Buyers who read a sheet pay nothing extra, and buyers who skip it pay a re-glaze.

Fit a 1200 mm case and check 1 door
A 1200 mm case fits a 1 m wall and a 900 mm leaves a gap, and a door swing runs 90 degrees. A shop runs 6 cases. The same rule holds for a Shenzhen cut shop and a Dubai one, with the frame line mattering in both. We keep the number on the same sheet, so a glass shop compares a span instead of a photo.
A 1200 mm case costs 860 and a 900 mm 720, and 140 buys 300 mm. A 900 mm case leaves a gap at 1 in 3 walls and a gap costs 90 of a filler plus 20 of a fit, which is 110 a wall or retail displays That number belongs on a cabinet sheet, because a glass size agreed verbally rarely survives a cut.

Conclusion
Four, 20, 2, 600 and 1200. Five numbers keep a glass case square. Most of these sags appear on a 4 mm shelf, which is exactly where a 6 mm shelf shows. Mark it on the sheet too, so whoever cuts the next glass has the reference. One door swung with a finger settles the question faster than a month of email.
Ask for a cut list and a swing test. An 860 case and a 56 shelf protect 640 a batch and 1,900 a batch. None of that shows in a showroom photo, which is why we print the numbers on a sheet. Buyers who read a sheet pay nothing extra, and buyers who skip it pay a re-glaze. The same rule holds for a Shenzhen cut shop and a Dubai one, with the frame line mattering in both.
Cut a glass and square a frame before a cabinet order. A 20 mm frame and a 2 mm gap keep a door a door, kiosk design. We keep the number on the same sheet, so a glass shop compares a span instead of a photo. That number belongs on a cabinet sheet, because a glass size agreed verbally rarely survives a cut.
