
Six checks, one hour
A display cabinet installation passes 6 checks in an hour: plumb at 2 mm, 8 mm anchors, a 20 mm back gap, level at 1 mm, a 24 hour cure and a 3 mm glass edge. A miss on any one shows in a week. Mark it on the card too, so whoever installs the next run has the reference without guessing. One site visit settles the question faster than a week of drawings.
An hour of checking on a 12 m run costs 60 dollars in labour and a re-fix costs 480 and a 2 day closure. Sixty dollars against 480 is 8 checks worth of labour kiosk design. None of that shows in a drawing, which is why we sign the plumb and the anchors on the card. Owners who settle it before an install pay nothing extra, and owners who settle it after a handover pay a re-fix.
Two millimetres out of plumb
A 2.1 m cabinet out of plumb by 2 mm leaves a 4 mm gap at the top against a wall, and 4 mm reads as a fault at 2 m. A 2 mm plumb line costs 12 minutes with a 1 m level. The same rule holds for a Shenzhen mall and a London one, with the back gap mattering in both.
A 2 mm gap under 300 lux casts a 6 mm shadow and a customer reads it as a crooked cabinet, and a re-fix of 480 dollars buys 40 of levelling. Twelve minutes is the cheapest hour mall kiosk layout. We keep the alternative on the same sheet, so the owner compares a millimetre instead of a promise. That number belongs on the install card, because a gap or a cure agreed verbally rarely survives a handover.

Eight millimetre anchors
A 1.2 m cabinet with 12 items weighs 96 kg and 4 anchors at 8 mm carry 60 kg each, and 4 anchors hold 240 kg against a 96 kg load. A 6 mm anchor at 30 kg carries 120 kg and fails at a 120 kg pull. Most of these faults appear at a first inspection, which is exactly when a 2 mm gap shows a shadow.
An 8 mm anchor costs 2.4 dollars and a 6 mm 1.1, and 1.3 dollars buys 120 kg of margin. A cabinet that pulls out of a wall costs a 480 re-fix plus a 900 claim, which counters and towers. Mark it on the card too, so whoever installs the next run has the reference without guessing. One site visit settles the question faster than a week of drawings.

Four numbers on the card
The card is what an installer signs, and each line answers a millimetre, a kilo or an hour rather than glass showcases. None of that shows in a drawing, which is why we sign the plumb and the anchors on the card. Owners who settle it before an install pay nothing extra, and owners who settle it after a handover pay a re-fix.
| Check | Limit |
|---|---|
| Plumb | 2 mm |
| Anchor | 8 mm, 4 per unit |
| Back gap | 20 mm |
| Level | 1 mm over 2 m |
| Silicone cure | 24 hours |
A twenty millimetre gap
A back gap at 20 mm lets a cable and a strip driver sit behind fixture materials and a 0 mm gap traps a lead against a wall. A 20 mm gap needs a 20 mm batten and 6 screws. The same rule holds for a Shenzhen mall and a London one, with the back gap mattering in both. We keep the alternative on the same sheet, so the owner compares a millimetre instead of a promise.
A 20 mm batten costs 14 dollars a cabinet and a 0 gap 0, and 14 buys a serviceable back. A lead trapped at 0 mm chafes in 3 months and a re-wire is 90 dollars a cabinet. That number belongs on the install card, because a gap or a cure agreed verbally rarely survives a handover. Most of these faults appear at a first inspection, which is exactly when a 2 mm gap shows a shadow.
One millimetre over two metres
A 2 m run level at 1 mm keeps 3 glass doors aligned and a 3 mm fall shows a 4 mm step between doors. A 1 m level reads 1 mm and a 600 mm level reads 3 mm on the same run. Mark it on the card too, so whoever installs the next run has the reference without guessing. One site visit settles the question faster than a week of drawings.
A 1 m digital level costs 78 dollars and a 600 mm 34, and 44 buys a true reading. A 4 mm step on a 3 door run costs a re-hang at 160 dollars, which is cash counters. None of that shows in a drawing, which is why we sign the plumb and the anchors on the card. Owners who settle it before an install pay nothing extra, and owners who settle it after a handover pay a re-fix.

Twenty-four hour cure
A neutral silicone needs 24 hours before a cabinet is loaded and a 6 hour cure allows a 2 mm shift under 96 kg. A 24 hour cure costs a day of a fit-out and a 6 hour one costs a re-seal. The same rule holds for a Shenzhen mall and a London one, with the back gap mattering in both. We keep the alternative on the same sheet, so the owner compares a millimetre instead of a promise.
A 24 hour cure adds 1 day to a 21 day fit-out and a re-seal costs 120 dollars a cabinet. An 8 cabinet order at 120 is 960, which is far more than a day jewellery display cases. That number belongs on the install card, because a gap or a cure agreed verbally rarely survives a handover. Most of these faults appear at a first inspection, which is exactly when a 2 mm gap shows a shadow.

Conclusion
Two millimetres, 8 mm, 20 mm, 1 mm and 24 hours. Five limits cosmetic kiosk. Mark it on the card too, so whoever installs the next run has the reference without guessing. One site visit settles the question faster than a week of drawings. None of that shows in a drawing, which is why we sign the plumb and the anchors on the card.
Check plumb, anchor and gap before a cabinet is loaded. A 12 minute plumb and a 14 dollar batten protect a 480 re-fix and a 960 re-seal. Owners who settle it before an install pay nothing extra, and owners who settle it after a handover pay a re-fix. The same rule holds for a Shenzhen mall and a London one, with the back gap mattering in both.
Check an anchor at 8 mm and a cure at 24 hours. Eight millimetres carries 60 kg per anchor and 24 hours keeps a 96 kg cabinet from shifting 2 mm. We keep the alternative on the same sheet, so the owner compares a millimetre instead of a promise. That number belongs on the install card, because a gap or a cure agreed verbally rarely survives a handover.
