UniqueKiosk · Shenzhen workshop
Kestrel Red Steel Counter Cigarette Rack, 650 mm
$85.00
Cigarette rack in red steel wire with four sloped shelves and a blank header. Price range: USD 85-180, set by shelf count and finish.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Shelf and Header
This cigarette rack stands 650 mm tall on a counter. A cigarette rack of this height sits under a cashier line of sight. Four shelves slope forward, so a front pack sells first. A blank header sits on top, so a shop adds its own card. The frame runs red, so a rack reads from a queue. One rack holds 40 packs. A retail display plan sets the till line.
Wire Build
The frame builds from 5 mm steel wire with a red powder coat. A cigarette rack in this wire takes a full shelf of packs with no bend. The rails form on a press, so a shelf slope stays even. The shelves weld to two posts, so a rack stands square. The coat bakes at 200 C, so a rail resists a pack scrape. A damp cloth clears dust from a coated wire.
Counter Set
A cigarette rack of this build sets in about two minutes with no tool. A staff places the rack on a counter, then fills the shelves from the top down. The base runs 230 mm deep, so a rack fits a narrow counter. A rack moves with one lift, so a refit takes a minute. The header clips on, so a staff swaps a card in seconds. Our store fixture crew checks the base.
| Specification | Detail |
|---|---|
| Height | 650 mm |
| Width | 230 mm |
| Shelves | 4 sloped |
| Wire | 5 mm |
| Capacity | 40 packs |
| Header | Blank |
| Finish | Red |
Store Use
A smoke shop uses this cigarette rack on a glass counter. A convenience shop uses one beside a till. A petrol station uses one at a kiosk window. A hotel shop uses one at a lobby desk. Countertop displays of this build fill a till line. A counter of 2 m takes two racks at this width. A counter display holds the card stock.
Build Notes
The wire cuts on a shear, then bends on a jig for an even shelf. A cigarette rack of this build keeps a level base after a fill. The rails press to a fixed slope, so a pack slides down. The coat wraps the whole frame, so a post stays clean. Each lot is checked for a level base and an even slope before packing. Read our bench notes for the slope check.
Sizes and Price
Shelf count runs at three, four or five for this cigarette rack. Width runs at 230 or 300 mm. The finish comes red, black or white. A lockable base and a light strip are options. A header card ships blank. List price starts at USD 85 for the four shelf rack. ukiosks builds this cigarette rack in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.