UniqueKiosk · Shenzhen workshop
Thyme White Steel Slatwall Shelf Bracket, 250 mm
$16.00
Slatwall shelf bracket pair in white steel with a 250 mm arm and front lip. Price range: USD 16-38, set by arm length and pack count.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Arm and Tab
This slatwall shelf bracket carries a 250 mm arm. A slatwall shelf bracket of this length holds a shelf of 300 mm depth. The tab sits at the back, so a bracket hooks into a 5 mm groove with no screw. The front carries a lip, so a glass shelf stays put. Two holes take a shelf screw. The pair holds 30 kg on one shelf. A retail display plan sets the shelf line.
Steel Build
The bracket forms from 2 mm steel sheet with a white powder coat. A slatwall shelf bracket in this gauge takes a full shelf of stock without a bend. The arm folds to a right angle on a press, so a shelf sits level. The tab bends to a fixed depth, so a bracket fits a standard panel. The lip bends up 8 mm, so a glass edge hides. A damp cloth clears a print from a coated face.
Wall Setup
A slatwall shelf bracket pair sets in about five minutes with one tool. A staff hooks the two tabs into one groove, then sets the shelf on the arms. A bracket moves along the groove, so a staff sets a height in a minute. A shelf of 900 mm takes two pairs. The tab holds a panel of 16 mm or 18 mm. A pair carries a glass shelf of 6 mm. Our wall fixture crew checks the groove.
| Specification | Detail |
|---|---|
| Arm | 250 mm |
| Steel | 2 mm |
| Tab | Slatwall 5 mm |
| Front lip | 8 mm |
| Load | 30 kg per pair |
| Shelf | 300 mm deep |
| Finish | White |
Store Use
A fashion shop uses this slatwall shelf bracket for a denim wall. A gift shop uses one for a box line. A beauty shop uses one for a product shelf. A grocery uses one for an end bay. Wall fixtures of this build carry a full run. A wall of 1200 mm takes eight brackets at this arm. A retail shelving bay takes the stock.
Build Notes
The sheet cuts on a laser, then folds on a press brake. A slatwall shelf bracket of this build keeps a level arm after a load. The tab forms in one fold, so a hook fits tight. The coat bakes at 200 C, so an arm resists a shelf scrape. Each lot is checked for a level pair and a firm tab before packing. Read our bench notes for the tab check.
Sizes and Price
The arm runs at 200, 250 or 300 mm for this slatwall shelf bracket. The pack runs at one pair, ten pairs or fifty pairs. The finish comes white, black or chrome. A glass shelf and a wood shelf are options. List price starts at USD 16 for the 250 mm pair. ukiosks builds this slatwall shelf bracket in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.