UniqueKiosk · Shenzhen workshop

Snow Black Wire Grid Panel with T Base, 1800 mm

$45.00

Wire grid panel in black steel with a T base, four casters and a square mesh face. Price range: USD 45-105, set by panel size and base type.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Mesh and Frame

This wire grid panel runs 600 mm wide and 1800 mm tall. A wire grid panel of this size holds 30 small items on hooks. The mesh uses a 75 mm square cell on 4 mm wire. A frame of 25 mm tube holds the mesh on all four sides. A T base with four casters keeps a panel upright. A panel carries 25 kg of goods. A retail display plan sets the hook rows.

Steel Build

The wire is 4 mm steel with a black powder coat. A wire grid panel in this wire takes a hanging bag without a bend. The mesh spot welds at each crossing, so a cell holds a hook. The frame bolts to the mesh at eight points, so a panel stays flat. Two panels join on a link plate, so a wall grows. A damp cloth clears a print from a coated wire.

Floor Set

A wire grid panel of this build sets in about 12 minutes with one tool. A staff bolts the frame to the T base, then fits the casters. The panel stands alone or joins a second panel, so a booth wall runs long. A link plate holds two panels at 600 mm. The casters lock, so a panel stays put at a show. A panel folds flat for a van. Our wall fixture crew packs this base.

Specification Detail
Width 600 mm
Height 1800 mm
Cell 75 mm
Wire 4 mm
Base T with casters
Load 25 kg
Finish Black

Store Use

A gift shop uses this wire grid panel for a hanging line. A craft fair uses one as a booth wall. A boutique uses one for bags. A photo studio uses one for a prop wall. Wall fixtures of this build carry a full hook run. A booth of 2400 mm takes four panels at this width. A store fixture shelf holds the stock.

Build Notes

The wire draws, then bends on a mesh loom for an even cell. A wire grid panel of this build keeps a square face after a season. The frame cuts on a saw with a stop, so a corner meets clean. The coat bakes at 200 C, so a wire resists a hook scratch. Each lot is checked for a level base and an even mesh before packing. Read our bench notes for the mesh check.

Sizes and Price

Width runs at 600, 900 or 1200 mm for this wire grid panel. Height runs at 1500 or 1800 mm. The base comes a T base, a H base or a wall bracket. The finish comes black, white or chrome. A shelf, a hook pack and a light bar are options. List price starts at USD 45 for the 600 mm panel. ukiosks builds this wire grid panel in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Snow Black Wire Grid Panel with T Base, 1800 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop