UniqueKiosk · Shenzhen workshop

Kite Black Steel Storage Rack with Mesh Decking, 1600 mm

$210.00

Storage rack in black steel with five mesh shelves and boltless slotted posts. Price range: USD 210-480, set by width and load rating.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Posts and Mesh

This storage rack runs 1600 mm wide and 1800 mm tall. A storage rack of this size takes a full pallet run of cartons on five levels. The posts are 1.5 mm steel with a slot row, so a shelf sets at 50 mm steps. Each shelf is a mesh deck, so a damp box dries and dust drops through. The rack carries 350 kg per shelf. The feet sit flat, so a rack stands on a slab. A retail display plan sets the back room.

Steel Build

The posts roll from cold rolled steel with a black powder coat. A storage rack in this gauge takes a heavy shelf without a twist. The shelves hook into the slots, so a level sets in seconds with no tool. The beam ends carry a lock pin, so a shelf stays put. The mesh deck welds at each crossing, so a deck holds a carton edge. A dry cloth clears a dust line from a post.

Room Setup

A storage rack of this build sets in about 15 minutes with no tool. A staff stands the two frames, then drops the beams and the mesh decks. The slot row lets a staff set a tall carton shelf and a low box shelf in one run. The rack stands alone or joins a second unit, so a run grows. A bay holds 20 cartons of 400 mm. The rack takes a pallet truck lane of 2200 mm. Our store fixture crew packs this run.

Specification Detail
Width 1600 mm
Height 1800 mm
Depth 600 mm
Shelves 5
Load 350 kg per shelf
Post 1.5 mm steel
Finish Black

Store Use

A boutique uses this storage rack in a back room. A grocery uses one for an overspill run. A warehouse uses one for a pick bay. A workshop uses one for parts boxes. Store fixtures of this build pair with a stock cart. A room of 2000 mm takes one rack with a walk round. A retail shelving bay holds the floor stock.

Build Notes

The coil slits, then rolls into a post with a punched slot row. A storage rack of this build keeps a straight post after a load. The mesh deck spot welds on a jig, so a grid stays even. The coat bakes at 200 C, so a post resists a truck knock. Each lot is checked for a level deck and a firm pin before packing. Read our bench notes for the pin check.

Sizes and Price

Width runs at 1200, 1600 or 2000 mm for this storage rack. Height runs at 1800 or 2100 mm. The shelf runs at four, five or six. The finish comes black, grey or blue. A shelf divider, a label strip and a wheel set are options. List price starts at USD 210 for the 1600 mm rack. ukiosks builds this storage rack in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Kite Black Steel Storage Rack with Mesh Decking, 1600 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop