UniqueKiosk · Shenzhen workshop

Slate Pine Veneer Two Tier Display Table, 1200 mm

$320.00

Two tier display table in pine veneer with white tops and a drawer band under the upper tier. Price range: USD 320-680, set by length and drawer count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Top and Tiers

This display table runs 1200 mm long and 600 mm deep. A display table of this length holds a folded line and a small goods tray at once. The upper tier sits 150 mm above the top, so a small item reads above a stack. Both tops are white laminate, so a colour pops. The drawer band runs four drawers, so stock stays at hand. The table stands 850 mm to the lower top. A retail display plan sets the table count.

Wood Build

The body is MDF with a pine veneer and a clear lacquer. A display table in this build shows a straight grain line along the face. The legs carry a 60 mm plank section, so a loaded table stays level. The top edge tapes in pine, so a corner reads solid. The drawers run on ball slides, so a pull stays smooth. The lacquer seals the surface, so a damp cloth is safe.

Floor Set

A display table of this weight needs two people on a stair. A staff sets a table in about 20 minutes with the legs bolted. The base carries four levellers, so a table stands true on a wood floor. The gap under the top runs 400 mm, so a stock box fits. A table sets against a wall or mid floor. A floor of 3 m holds two tables with a pass gap. Our store fixture crew shares this bolt.

Specification Detail
Length 1200 mm
Depth 600 mm
Height 850 mm
Tier 150 mm
Body Pine veneer
Drawers Four
Top White laminate

Shop Use

A boutique uses this display table for a folded line. A denim shop uses one for a stack. A bag shop uses one for a tray of small goods. A trade show uses one at a booth centre. Wood displays of this build pair with a wood riser. A floor of 1200 mm holds one table at this length. A clothing rack stands at the table end.

Build Notes

The panel cuts on a saw, then edge tapes on a line. A display table of this build keeps a flat top after a season. The veneer presses on a hot press, so a face shows no bubble. The lacquer sprays in a booth, then cures for a day. Each unit is checked for a level top and a smooth drawer before packing. Read our bench notes for the veneer press.

Sizes and Price

Length runs at 900, 1200 or 1500 mm for this display table. Depth runs at 500 or 600 mm. The top comes white, grey or wood face. The drawer band comes with two or four drawers. A glass top, a riser and a light bar are options. List price starts at USD 320 for the 1200 mm table. ukiosks builds this display table in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Slate Pine Veneer Two Tier Display Table, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop