UniqueKiosk · Shenzhen workshop

Lotus Chrome Outrigger Crossbar, 1200 mm

$30.00

Outrigger crossbar in chrome square tube with two end bends and hook tabs for wall uprights. Price range: USD 30-72, set by length and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Bar and Bends

This outrigger crossbar runs 1200 mm across the top. An outrigger crossbar of this span carries 40 garments at a 30 mm shift. The tube is 25 mm square, so a hanger slides free. The ends bend down 45 degrees, so a bar meets a wall upright at a clean angle. Two hook tabs sit on the tube, so a sign or a mirror hangs. A bar holds 35 kg over the span. A retail display wall uses this bar.

Chrome Build

The tube is 1.5 mm steel with a polished chrome plate. An outrigger crossbar in this gauge holds a full rail without a sag. The bends pull on a mandrel, so a corner stays round. The hook tabs weld on a fixture, so each tab sits true. The plate buffs before packing, so a bar shows a clean face. A dry cloth clears a mark from the tube.

Wall Fit

An outrigger crossbar of this length sets between two uprights at 1200 mm centres. A staff fits a bar in about four minutes with two bolts per end. The bar sets at 1500 mm, so a shirt clears the floor. The bend holds a bar off the wall, so a sleeve hangs free. A bar pairs with a shelf above for a folded line. A wall of 3 m takes two bars with a gap. Our store fixture wall shares this spacing.

Specification Detail
Span 1200 mm
Tube 25 mm
Steel 1.5 mm
Bend 45 deg
Load 35 kg
Tabs Two
Weight 3.4 kg

Shop Use

A boutique sets this outrigger crossbar on a wall system. A denim shop uses one for a jean line. A suit shop uses one for a jacket row. A trade show uses one at a booth wall. Wall fixtures of this build pair with a faceout arm. A wall of 1200 mm holds one bar at this span. A clothing rack stands below it.

Build Notes

The tube cuts on a saw, then bends on a mandrel press. An outrigger crossbar of this build keeps a square corner after a move. The tabs weld on a jig, then grind flat. The chrome plate runs at 0.6 micron, so a bar resists a wipe. Each lot is checked for a level span and a clean bend before packing. Read our bench notes for the bend set.

Sizes and Price

Span runs at 900, 1200 or 1500 mm for this outrigger crossbar. The tube comes square or round. The finish comes in chrome, black or satin steel. The ends come bent or straight. A shelf, a faceout arm and a sign hook are options. List price starts at USD 30 for the 1200 mm bar. ukiosks builds this outrigger crossbar in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Lotus Chrome Outrigger Crossbar, 1200 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop