UniqueKiosk · Shenzhen workshop

Pine Wooden Display Crate with Two Shelves, 530 mm

$68.00

Display crate in natural pine with two slatted shelves and side handles. Price range: USD 68-160, set by height and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Crate and Shelves

This display crate stands 530 mm tall and 360 mm wide. A display crate of this size takes two rows of small stock on a floor. Two slatted shelves sit at 250 mm pitch, so a bag fits between. The front stays open, so a shopper reaches in. The side panels carry grab handles, so two staff move the unit. A crate holds 25 kg across the shelves. A retail display run uses this crate.

Pine Build

The frame is 18 mm pine with a clear matte seal. A display crate in this timber keeps a warm tone under shop light. The back runs a dark plywood panel, so a product stands out. The slats joint at each end, so a shelf stays level. The corners bolt through, so a crate takes a move without a split. A dry cloth clears a dust line from the top rail.

Floor Set

A display crate of this size fits a floor patch of 400 mm. The base sits flat, so a crate stays put under a lean. A shop sets two crates side by side for a stepped run. A crate stacks on a second unit as an option, so a wall grows tall. The shelves take a chalk card at the rail edge. A crate works well near a till, so a shopper picks a last item. Our store fixture plan starts here.

Specification Detail
Height 530 mm
Width 360 mm
Depth 260 mm
Shelves Two
Board 18 mm pine
Load 25 kg
Weight 9 kg

Shop Use

A grocery shop sets this display crate near a produce line. A bakery uses one for wrapped loaves. A homeware shop uses one for textiles. A trade show uses one at a booth front. display stands of this build pair with a wood table. A floor of 1200 mm holds two crates with room to pass. A shelving bay fits beside it.

Build Notes

The boards are cut on a panel saw, then sanded at the edge. A display crate of this build keeps a clean face after a move. The slats join on a jig, so each shelf sits square. The frame is sealed by hand, then dried flat. Each unit is checked for a level shelf and a true corner before packing. Read our bench notes for the slat joint.

Sizes and Price

Height runs at 400, 530 or 700 mm for this display crate. Shelf count runs at one, two or three. The finish comes natural pine, white wash or black stain. The base comes flat or on castors. A chalk card, a stack kit and a liner are options. List price starts at USD 68 for the 530 mm crate. ukiosks builds this display crate in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Pine Wooden Display Crate with Two Shelves, 530 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop