UniqueKiosk · Shenzhen workshop
Maple Black Wall Mount Outrigger System, 1800 mm
$190.00
Outrigger system in black tube steel with a straight bar and one centre post. Price range: USD 190-420, set by bar length and bracket type.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Bar and Brackets
This outrigger system spans 1800 mm on a single bar. An outrigger system of this length takes about 40 garments on 40 mm hangers. Two wall brackets hold the bar at 120 mm off the wall. The brackets bolt to a stud at two points each. One centre post carries the load at the middle, so the bar stays level. A staff mounts the frame in about twenty minutes. A retail display wall uses this span.
Tube Build
The bar is 25 mm round tube with a 1.5 mm wall. An outrigger system in this build carries 60 kg without a sag. The ends close with a cap, so no open edge shows. The post runs a 25 mm tube with a round foot plate. The coat is a black powder finish at 60 micron. A dry cloth clears a dust line from the bar. The joints weld, then polish smooth.
Wall Fix
An outrigger system of this depth sets the garment line 120 mm from the wall. The bracket runs a 60 mm plate with four holes, so a stud or a masonry anchor works. A shop keeps the bar at 1500 mm for a short line and 1700 mm for a long coat. The post foot sits on a levelling pad. A bracket set of 150 mm takes a 20 mm wall step. A second bar adds a two level run. Our store fixture set shares this plate.
| Specification | Detail |
|---|---|
| Bar Length | 1800 mm |
| Tube | 25 mm |
| Wall Stand | 120 mm |
| Bar Height | 1500 mm |
| Load | 60 kg |
| Finish | Black |
| Weight | 11 kg |
Shop Use
A boutique sets this outrigger system on a side wall. A denim shop uses one for a jean line. A bridal studio uses one for a gown row. A trade show uses one at a booth back. Clothing racks of this build pair with a faceout arm. A wall length of 2000 mm holds the frame with room for a mirror. A mannequin stand fits beside it.
Build Notes
The tube is cut on a saw, then bent on a mandrel. An outrigger system of this build keeps a straight bar after transport. The brackets are stamped from 3 mm plate, then drilled on a jig. The frame is phosphated before the coat. Each unit is checked for a level bar and a square bracket before packing. Read our bench notes for the bracket fit.
Sizes and Price
Bar length runs at 1200, 1500 or 1800 mm for this outrigger system. The bar height is set on site. The finish comes in black, white or satin chrome. The mounts come as wall plate or slot strip. A faceout arm, a second bar and a shelf add are options. List price starts at USD 190 for the 1800 mm unit. ukiosks builds this outrigger system in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Violin Exhibition Display Case, Glass Tower 1.8 m
Price:
Dispensing Optical Display Table, Black Top 1.8 m
Price:
Circular Display Table, White Tiers and Chrome Legs 1.2 m
Price:








Reviews
There are no reviews yet.