UniqueKiosk · Shenzhen workshop

Kelp White Steel Pegboard Gondola, 1800 mm

$420.00

Pegboard gondola in white powder coated steel with a slotted back panel and a base shelf. Price range: USD 420-880, set by height and shelf count.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Panel and Slots

This pegboard gondola runs 1800 mm tall and 1000 mm wide. A pegboard gondola with a 6 mm hole panel takes standard hooks at 25 mm pitch. The two posts carry slot strips, so a shelf moves in 50 mm steps. The base shelf holds 60 kg across the width. The panel stands vertical, so a hook faces the aisle. A staff fits a row of hooks in about ten minutes. A wire grid display set shares this pitch.

Steel Build

The frame is 30 mm steel with a white powder coat. A pegboard gondola in this build takes a loaded shelf without a bow. The panel is 1.2 mm steel with punched holes, so the face stays flat. The feet run a back bar and a front pad, so the unit stands on a slope. The post joins the panel with bolts, so a rebuild takes fifteen minutes. A dry cloth clears a mark from the coat.

Bay Layout

A pegboard gondola of this width sets against a wall at 1000 mm centres. The shelf depth runs 400 mm, so a boxed item sits inside the line. A shop sets two units side by side for a run of four metres. The top edge carries a sign strip as an option. A back panel gap of 40 mm keeps a wall vent clear. A levelling foot takes a floor step of 5 mm. Our retail display run joins this bay.

Specification Detail
Height 1800 mm
Width 1000 mm
Depth 400 mm
Panel 1.2 mm steel
Hole Pitch 25 mm
Base Load 60 kg
Weight 48 kg

Shop Use

A convenience store sets this pegboard gondola on a wall run. A hardware shop uses one for a carded line. A pet shop uses one for collars and leads. A trade show uses one at a booth back wall. Shelving of this build pairs with a gondola end. A bay of 1100 mm holds the unit with room to stock from a trolley. A store fixture plan starts here.

Build Notes

The panel is punched on a press, then folded at the edges. A pegboard gondola of this build keeps a flat face after a move. The posts are cut to length and slotted on a mill. The frame is phosphated before the powder coat. Each unit is checked for a level base and a true panel before packing. Read our bench notes for the slot detail.

Sizes and Price

Height runs at 1500, 1800 or 2100 mm for this pegboard gondola. Width runs at 900, 1000 or 1250 mm. The depth comes at 400 or 500 mm. The finish comes in white, grey or black. Extra shelves, a sign strip and a light bar are options. List price starts at USD 420 for the 1800 mm unit. ukiosks builds this pegboard gondola in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Kelp White Steel Pegboard Gondola, 1800 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop