UniqueKiosk · Shenzhen workshop
Thorn Black Metal Sunglasses Bar Display, 400 mm
$95.00
Bar display in black steel with three chrome arms for sunglasses and small goods. Price range: USD 95-210, set by arm count and base type.
- Any size, any finish – quoted from your store plan.
- Shop drawings and a 3D layout before we cut.
- Crated for sea or air freight, installed on site.
Description
Arm Layout
This bar display runs 400 mm tall with three pairs of chrome arms. A bar display of this spacing shows six sunglasses without a tangle. The arms sit at 80 mm pitch, so a temple arm clears the row below. Each arm takes 0.6 kg at the tip. The post stays square at 40 mm, so the arms hold level. A staff loads the stand in about two minutes. A retail display row uses this arm.
Steel and Chrome
The post is square steel tube in a black powder coat. A bar display with this finish keeps a clean line under a shop lamp. The arms are chrome rod at 8 mm with a cap at the tip. The base is a 180 mm steel plate at 4 kg, so the stand does not tip. The arm joins the post with a machined collar. A dry cloth clears a print mark from the coat.
Counter Fit
A bar display of this height sits on a glass counter or a shelf of 20 mm. The base plate carries 180 mm, so a counter edge stays clear. A shop sets the arms in two rows facing the aisle. The post turns on the base through a hidden screw. A staff locks the angle with one turn. A price card sits below the base. Our jewelry display set shares this base.
| Specification | Detail |
|---|---|
| Height | 400 mm |
| Arms | Six chrome |
| Arm Pitch | 80 mm |
| Post | 40 mm steel |
| Base | 180 mm plate |
| Load | 0.6 kg per arm |
| Weight | 4.5 kg |
Shop Use
An optical shop sets this bar display on a display counter. A fashion store uses one for a sunglass line. A resort shop uses one for a seasonal range. A trade show uses one at a booth edge. Countertop displays of this build pair with a mirror stand. A counter of 500 mm holds the unit with room to lift a pair. A store fixture plan starts here.
Build Notes
The post is cut on a saw and welded at the base plate. A bar display of this build keeps the arms level after a move. The collar is turned on a lathe, then tapped for the arm thread. The coat is a two part powder finish cured in an oven. Each unit is checked for a level base and a straight arm before packing. Read our bench notes for the collar detail.
Sizes and Price
Height runs at 400, 500 or 600 mm for this bar display. Arm count runs at two, three or four per side. The finish comes in black, white or chrome. The base comes as a square plate or a round disc. A price holder, a dust bag and a carry box are options. List price starts at USD 95 for the 400 mm unit. ukiosks builds this bar display in Shenzhen to order, so send your drawing through contact us.
| Material | Steel frame with chrome, brass or powder-coated finish |
|---|---|
| Size | Standard size as listed. Custom lengths and heights on request |
| Build time | Sampling in 7 days, production in 25 to 30 days |
| Packing | Wrapped, crated and palletised for sea or air freight |
| Minimum order | One unit. Volume pricing from ten units |
| Drawing | Shop drawing and 3D layout sent before cutting |
Send us your plan
Fixture, size, quantity and where it ships. We reply within one working day.
Made to size
Any length, height or shelf count. Send a sketch and we quote that size.
Drawings first
Shop drawings and a 3D layout come before cutting. You approve every joint.
Crated for export
Every unit is wrapped, crated and palletised for sea or air freight.
Install support
Our team installs, or we brief your fitter with photos and a pack.
More fixtures from the shop
Dispensary Wood Shelving Unit, Seven Tiers 2.2 m
Price:
Hanging Wall Rail Clothing Rack, Steel Shelf 2 m
Price:
Mobile Shop Wall Display Units, White Shelves 1.2 m
Price:








Reviews
There are no reviews yet.