UniqueKiosk · Shenzhen workshop

Quay Chrome Steel Peg Hook Faceout, 250 mm

$18.00

Peg hook in chrome steel with two back prongs and a raised tip. Price range: USD 18-42 for a pack, set by length and finish.

  • Any size, any finish – quoted from your store plan.
  • Shop drawings and a 3D layout before we cut.
  • Crated for sea or air freight, installed on site.

Description

Hook and Prongs

This peg hook runs 250 mm long on a 5 mm chrome rod. A peg hook of this reach holds a carded item at the 200 mm point. Two back prongs sit at 25 mm pitch, so the hook drops into a standard hole. The arm tip lifts at 15 degrees, so a packet stays put. A flat shoulder at the back takes a price strip. A shop moves a hook to a new hole in seconds. A retail display panel uses this hook.

Chrome Finish

The rod is bright chrome over a steel core. A peg hook in this finish keeps a clean face under a shop lamp. The chrome layer runs at 12 micron, so a busy aisle keeps its shine. The prongs are bent, not welded, so the hook holds at the hole. The tip is rounded, so a packet edge does not snag. A dry cloth clears a print mark.

Pegboard Fit

A peg hook of this size fits a 6 mm hole panel at 25 mm pitch. The hook holds 4 kg at the shoulder, so a heavy item stays safe. A shop sets a row at 100 mm apart for a small goods bay. The arm clears a 120 mm shelf above, so a packet lifts free. A second hook doubles the reach for a long item. A pin under the prong locks the hook. Our shelving set takes this hole.

Specification Detail
Length 250 mm
Rod 5 mm steel
Prong Pitch 25 mm
Finish Chrome
Load 4 kg
Tip Raised 15 deg
Weight 0.2 kg

Shop Use

A hardware shop sets this peg hook on a white panel. A convenience store uses one for a carded line. A pet shop uses one for a small goods bay. A trade show uses one at a booth panel. Wire grid displays of this build take this prong. A panel at 1500 mm puts the hook at a shopper hand height. A store fixture plan starts here.

Build Notes

The rod is cut, then bent on a jig, so each hook matches in reach. A peg hook of this build keeps a straight arm after a move. The prong angle is set at 2 degrees, so the hook holds its load. The chrome bath runs at 12 micron over nickel. Each unit is checked for a free drop and a firm hold before packing. Read our bench notes for the prong angle.

Sizes and Price

Length runs at 150, 200 or 250 mm for this peg hook. Prong count runs at two or four. The finish comes in chrome, black or white. The tip comes straight or raised. A price strip, a scan plate and a box of ten are options. List price starts at USD 18 for the 250 mm unit. ukiosks builds this peg hook in Shenzhen to order, so send your drawing through contact us.

Reviews

There are no reviews yet.

Be the first to review “Quay Chrome Steel Peg Hook Faceout, 250 mm”

Your email address will not be published. Required fields are marked *

Material Steel frame with chrome, brass or powder-coated finish
Size Standard size as listed. Custom lengths and heights on request
Build time Sampling in 7 days, production in 25 to 30 days
Packing Wrapped, crated and palletised for sea or air freight
Minimum order One unit. Volume pricing from ten units
Drawing Shop drawing and 3D layout sent before cutting
Quick enquiry

Send us your plan

Fixture, size, quantity and where it ships. We reply within one working day.

On this page

01

Made to size

Any length, height or shelf count. Send a sketch and we quote that size.

02

Drawings first

Shop drawings and a 3D layout come before cutting. You approve every joint.

03

Crated for export

Every unit is wrapped, crated and palletised for sea or air freight.

04

Install support

Our team installs, or we brief your fitter with photos and a pack.

More fixtures from the shop